CamRanger MINI User Manual page 11

The property field specifies the camera property to be changed. The three options are Shutter
Speed, Aperture, and ISO. The Mid-Point indicates the middle exposure of the sequence. The
step size sets the number of steps to adjust the exposure between each shot. The number of
shots specifies the number of shots in the sequence. The maximum number of shots is
dynamically calculated based on the mid-point and the possible camera values.
The minimum and maximum exposure values for the sequence will be displayed above the
Start button. Press the Start button to begin the sequence.
Because the CamRanger is actually changing the camera's exposure parameters, the camera
must be set to Manual exposure mode to perform HDR bracketing.
HDR sequences can also be performed when the camera is set to bulb mode. The settings
are similar, except that the property is shutter speed/bulb duration and the mid-point is set in
seconds. The minimum bulb duration is 100 ms. The Advanced Bracketing tab will
automatically change to bulb settings when the camera is set to bulb mode.
© CamRanger
US Patent 9712688 09/07/18 11