CamRanger MINI User Manual page 21

When the CamRanger app is started with the PT Hub and MP-360 connected, a tripod button
will appear next to the other tab buttons.
A directional pad is displayed on the tripod tab. Press and hold to move the tripod head in the
desired direction. Double tapping will continue to move the tripod head in that direction until
the directional pad is tapped again. The slider below the directional pad controls the pan/tilt
speed of the tripod head. The approximate MP-360 battery capacity is shown at the top left.
The panorama button at the bottom left expands the tripod tab to display the controls for
configuring an automated panorama.
To perform a panorama, a calibration must first be performed. To calibrate, press the
"Calibrate" button and follow the steps. The calibration is valid for four hours or until the
session is restarted or the tripod head speed is adjusted.
© CamRanger
US Patent 9712688 09/07/18 21