Table of Contents
Advertisement
HP
9816
The following program sends a command string to the
Model 595 from a Hewlett-Packard Model 9816 computer
and displays the instrument reading string on the computer
CRT. The computer must be equipped with the HP82937
GPlB Interface and BASICA
2.0.
DIRECTIONS
1. With the power off, connect the Model 595 to the
HP82937A GPlB interface installed in the 9816
computer.
2. Using the front panel program feature, set the primary
address of the Model 595 to 28.
3.
Type EDIT and press the EXEC key.
4. Enter the lines in the program below, using the ENTER
key after each line.
5. Press the 9816 RUN key and type in the desired com-
mand string at the command prompt. For example, to
place the instrument in the current function and 2 0 0 d
range, type in FlR8X and press the ENTER key.
6. The instrument reading string will then appear on the
CRT. A typical display is: NIVX+0.59500E-4, +OO.OOO.
57
Advertisement
Table of Contents
