Table of Contents
Advertisement
PET/CBM 2001
The following program sends a command string to the
Model 595 from a PETKBM 2001 computer and displays
the instrument reading string on the computer CRT.
As
the
PETKBM computer has a standard IEEE-488 interface, no
additional equipment is necessary.
DIRECTIONS
1 . With the power off, connect the Model 595 to the
PETKBM IEEE-488 interface
2. Using the front panel program feature, set the primary
address of the Model 595 t o
28.
3. Enter the lines of the program below, using the RETURN
key after each line is typed.
4. Type RUN and press the RETURN key. Type in the desired
command string at the command prompt. For example,
to place the instrument
in
the current function and
200pA range, type in FlR8X and press the RETURN key.
5. The instrument reading string will then appear on the
CRT. A typical display is: NIVX+0.59500E-12, +OO.OOO.
63
Advertisement
Table of Contents
