Table of Contents
Advertisement
Help Guide
Digital Still Camera
DSC-RX0
ISO
Sensitivity to light is expressed by the ISO number (recommended exposure index). The larger the number, the higher
the sensitivity.
MENU →
(Camera Settings1) → [ISO] → desired setting.
1
Menu item details
Multi Frame NR:
Combines continuous shots to create an image with less noise. Select the desired ISO number from [ISO AUTO] or ISO
200 – 25600.
ISO AUTO:
Sets the ISO sensitivity automatically.
ISO 80 – ISO 12800:
Sets the ISO sensitivity manually. Selecting a larger number increases the ISO sensitivity.
Note
[ISO AUTO] is selected when using the following functions:
[Intelligent Auto]
[Superior Auto]
When [ISO] is set to a value lower than ISO 125, the range for recordable subject brightness (dynamic range) may decrease.
The higher the ISO value, the more noise will appear on the images.
The available ISO settings will differ depending on whether you are shooting still images, shooting movies, or using HFR.
When shooting movies, ISO values between ISO 125 and ISO 12800 are available. If the ISO value is set to a value smaller than
ISO 125, the setting is automatically switched to ISO 125. When you finish recording the movie, the ISO value returns to the
original setting.
When you use [Multi Frame NR], it takes some time for the product to perform the overlay processing of images.
Hint
You can change the automatically set ISO sensitivity range for the [ISO AUTO] mode. Select [ISO AUTO] and press the right
button, and set the desired values for [ISO AUTO Maximum] and [ISO AUTO Minimum]. The values for [ISO AUTO Maximum]
and [ISO AUTO Minimum] are also applied when shooting in [ISO AUTO] mode under [Multi Frame NR].
Related Topic
Multi Frame NR
ISO AUTO Min. SS
4-698-613-11(1) Copyright 2017 Sony Corporation
92
Advertisement
Table of Contents
