Sony DSC-RX100M7 Service Manual

Hide thumbs Also See for DSC-RX100M7:

Help manual (634 pages)

Startup manual (183 pages)

Instruction manual (97 pages)

Table of Contents

Quick Links

Download this manual

2023/12/29 03:11:18 (GMT+09:00)

DIGITAL STILL CAMERA

DSC-RX100M7

DSC-RX100M7G

DISCLAIMER:

USE AT OWN RISK. SONY AND ITS AFFILIATES ARE NOT LIABLE FOR ANY DAMAGE OR INJURY CAUSED

TO ANY DIGITAL ELECTRONIC EQUIPMENT, PERSON, OR PROPERTY, WHICH OCCURS DUE TO USE OF THE TOOLS,

PARTS, DOCUMENTATION, OR OTHER MATERIALS HEREIN PROVIDED, WHETHER FOR REPAIR, DIAGNOSIS,

MAINTENANCE, MODIFICATION, OR OTHERWISE, INCLUDING BUT NOT LIMITED TO: ANY INDIRECT, INCIDENTAL,

SPECIAL, OR CONSEQUENTIAL DAMAGES; ANY LOSS OF DATA, PRIVACY OR PROFITS; OR ANY INABILITY TO USE, OR

REDUCED FUNCTIONALITY OF, THE DIGITAL ELECTRONIC EQUIPMENT.

MANUAL BEFORE PROCEEDING. PLEASE FOLLOW ALL STEPS IN THE ORDER IN WHICH THEY ARE DESCRIBED. IF

YOU DO NOT HAVE ALL TOOLS AND PARTS AVAILABLE TO YOU, OR ARE NOT COMFORTABLE PERFORMING THE

REPAIRS DESCRIBED HEREIN, DO NOT PROCEED. FAILURE TO FOLLOW THESE INSTRUCTIONS, OR USE THE PROPER

TOOLS AND PARTS, MAY DAMAGE YOUR PRODUCT, LEAD TO PERSONAL INJURY OR CAUSE PROPERTY DAMAGE.

SERVICE MANUAL

PLEASE READ ALL INSTRUCTIONS IN THIS

SYS SET

Table of Contents

Summary of Contents for Sony DSC-RX100M7

Page 1 DSC-RX100M7G DISCLAIMER: USE AT OWN RISK. SONY AND ITS AFFILIATES ARE NOT LIABLE FOR ANY DAMAGE OR INJURY CAUSED TO ANY DIGITAL ELECTRONIC EQUIPMENT, PERSON, OR PROPERTY, WHICH OCCURS DUE TO USE OF THE TOOLS, PARTS, DOCUMENTATION, OR OTHER MATERIALS HEREIN PROVIDED, WHETHER FOR REPAIR, DIAGNOSIS, MAINTENANCE, MODIFICATION, OR OTHERWISE, INCLUDING BUT NOT LIMITED TO: ANY INDIRECT, INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES;...
Page 2: Safety Check-Out
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY.
Page 3: Manual Structure
2023/12/29 03:11:18 (GMT+09:00) Manual Structure Purpose of this manual This manual describes the information items that premise the service based on the components parts assuming use of system and service engineers. Related manuals Besides this manual, the following manuals are available. • Startup Guide (Supplied with this unit) •...
Page 4: Section 2 Service Note
2023/12/29 03:11:18 (GMT+09:00) Section 2 Service Note 2-1. Operation Notes 2-1-1. Flexible Board • Make sure that the conductive side of a flexible board does not have any stain or foreign materials. • Do not touch the conductive side of flexible boards with bare hands. •...
Page 5 2023/12/29 03:11:18 (GMT+09:00) 2-1-3. Discharging of the Flash Capacitor The charging capacitor for the flash has been charged at high voltage. Therefore, there is a possibility of an electric shock if you directly handle this capacitor. The high-voltage charge will not be discharged by simply turning off the unit’s power. Make sure any remaining voltage is discharged by short-circuiting the flash capacitor with a Short Jig.
Page 6: Section 4 Replacement Of Main Parts
2023/12/29 03:11:18 (GMT+09:00) Section 4 Replacement of Main Parts 4-1. Disassembly Flow This set can be disassembled in the order shown below. Bottom Cabinet Section 4-2-1. Rear Cabinet Section (Page 29) SY Board Section Rear Cabinet Section 4-2-2. Adhesive Sheet 4-2-11. Main Frame (FL) (64200) Assy (64210) (Page 33)
Page 7 2023/12/29 03:11:18 (GMT+09:00) 4-2. Disassembly • Follow the disassembly procedure in the numerical order given. • When installing, reverse the steps of removal. 4-2-1. Rear Cabinet Section SY Board Section [ 15 ] [ 16 ] BB cushion (64200) Refer to "Notes on Assembling the BB Cushion (64200)".
Page 8 2023/12/29 03:11:18 (GMT+09:00) Note 2 While lifting the A portion of the USB lid MIC lid (64210) (64210) and HDMI lid (64210) slightly with tweezers or the like, pull the USB lid (64210) and HDMI lid (64210) in the direction of arrow to disengage it. Tweezers USB lid (64210) HDMI lid (64210)
Page 9 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembling the BTB Holder (64210) RE (1) Attach the BTB holder (64210) RE as shown in figure. BTB holder (64210) RE BTB holder (64210) RE BTB holder (64210) RE Notes on Assembling the BTB Holder (64210) RE (2) Align the bottom of the RE-1004 flexible board with the BB cushion (64200).
Page 10 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembling the BB Cushion (64200) Attach the BB cushion (64200) as shown in figure. 0.5mm 0.5mm BB cushion (64200) BTB holder (64210) RE Confirmation after Installation of the Rear Cabinet Section The EVF and VF window pop out completely after installing the Rear Cabinet Section. VF window The LCD open/close completely after installing the Rear Cabinet Section.
Page 11 2023/12/29 03:11:18 (GMT+09:00) 4-2-2. Adhesive sheet (FL) (64200) [ 6 ] Adhesive sheet (FL) (64200) Refer to "Notes on Assembling the Sheet LC (Pull Magnet) and Adhesive Sheet (FL) (64200)". [ 3 ] Gasket (R) (64210) Refer to "Notes on Assembling the Gasket (R) (64210)".
Page 12 2023/12/29 03:11:18 (GMT+09:00) High-voltage Cautions Discharging the Capacitor: Short-circuit between two points with the short jig about 10 seconds. Peel off the Insulating sheet. Insulating Sheet Connect the short jig to terminals of flash capacitor to discharge the capacitors. Refer to "2-1-3. Discharging of the Flash Capacitor". (Part code: 1-215-869-11) SYS SET...
Page 13: Notes On Assembly
2023/12/29 03:11:18 (GMT+09:00) Notes on Assembly Notes on Assembling the Gasket (R) (64210) Attach the Gasket (R) (64210) as shown in figure. Attaching standard SY heat sink (64210) Gasket (R) (64210) Notes on Assembling the Lens Cushion (64200) (1) Attach the lens cushion (64200) as shown in figure. Attaching standard Lens cushion (64200) Notes on Assembling the Lens Cushion (64200) (2)
Page 14 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembling the ST-1044 Flexible Board Arrange the flexible board as shown in figure. ST-1044 flexible board Fold the flexible board. ST-1044 flexible board Notes on Assembling the Sheet LC (Pull Magnet) and Adhesive Sheet (FL) (64200) Attach the sheet LC (pull magnet) and adhesive sheet (FL) (64200) as shown in figure. 0.0 mm External form of the lens...
Page 15 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembling the FP-2424 Flexible Board (1) Attach the FP-2424 Flexible Board as shown in figure. Mountain fold (Do not overlap to the Boss and convex shape.) Convex shape External form of the lens Boss Convex shape Valley fold (Do not overlap to the convex shape.) FP-2424 Flexible Boards...
Page 16 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembling the FP-2424 Flexible Board (2) Attach the FP-2424 Flexible Board as shown in figure. Intersection ± 0.5 mm with the first Sheet LC (Pull Magnet) Intersection ± 0.5 mm with Sheet LC (Pull Magnet) the first Sheet LC (Pull Magnet) Adhesive Sheet (FL) (64200) Sheet LC (Pull Magnet) Sheet LC (Pull Magnet)
Page 17 2023/12/29 03:11:18 (GMT+09:00) 4-2-3. SY-1100 Board [ 13 ] FPC-2022 flexible board [ 7 ] Wifi blind sheet (64210) (Note 2) Refer to "Notes on Assembling the Wifi Blind Sheet (64210)". [ 8 ] Adhesive 64210 sheet (WIFI) Refer to "Notes on Assembling the Adhesive 64210 Sheet (WIFI)".
Page 18 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembly Notes on Assembling the Cushion (64210) GND Attach the cushion (64210) GND as shown in figure. Attaching standard Cushion (64210) GND Notes on Assembling the Wifi Blind Sheet (64210) Attach the wifi blind sheet (64210) as shown in figure. Within 0.5mm Wifi blind sheet (64210) Align the hole with the hole.
Page 19 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembling the SY heat Sink Block (1) Attach the SY heat sink block as shown in figure. SY heat sink block CD-1011 flexible board SY heat sink (64210) CD-1011 flexible board Lens BT-2030 flexible board SY heat sink block Notes on Assembling SY Heat Sink Block (2) ST-1044 flexible board SY insulating sheet (A)
Page 20 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembling SY Heat Sink Block (3) Arrange the flexible board as shown in figure. Flexible board Flexible board SY-1100 board SY-1100 board Flexible board Range to fold the flexible board Range to fold the flexible board Notes on Assembling the CD Cushion (64210) Attach the CD cushion (64210) as shown in figure.
Page 21 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembling the Adhesive 64210 Sheet (WIFI) Attach the adhesive 64210 sheet (WIFI) as shown in figure. Adhesive 64210 sheet (WIFI) Attaching standard Align the notch and the convex part. Notes on Assembling the Adhesive Sheet (NFC) (64200) Attach the adhesive sheet (NFC) (64200) as shown in figure.
Page 22: Lens Block Section
2023/12/29 03:11:18 (GMT+09:00) 4-2-4. Lens Block Section Refer to "4-3. Lens Block" for disassembly/assembly of the Lens Block. [ 1 ] [ 4 ] Lens blind sheet (64200) Refer to "Notes on Assembling the Lens Blind Sheet (64200)". [ 2 ] Light shield ring (1920) [ 5 ] Lens Block Section Refer to "Notes on Assembling the [ 3 ] Interception sheet (64200)
Page 23 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembly Notes on Assembling the CD-1011 Flexible Board Fold the CD-1011 flexible board as shown in figure. Mountain fold Mark CD-1011 flexible board Mark Valley fold Notes on Assembling the Lens Blind Sheet (64200) Attach the lens blind sheet (64200) as shown in figure. Attaching standard Lens blind sheet (64200) Attach the lens blind sheet (64200) so...
Page 24 2023/12/29 03:11:18 (GMT+09:00) 4-2-5. MS-1040 Board [ 4 ] [ 10 ] MS-1040 board [ 9 ] MS GND sheet (64200) Refer to "Notes on Assembling the MS GND sheet (64200)". [ 8 ] MS insulating sheet (A) [ 2 ] Heat sheet (U) (64200) Refer to "Notes on Assembling the Heat Sheet (U) (64200) and Heat Sheet (B) (64210)".
Page 25 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembling the MS GND sheet (64200) Attach the MS GND sheet (64200) as shown in figure. MS GND sheet (64200) Insufficient pressure Overhang Copper foil MS-1040 board Notes on Assembling the MS GND Sheet (64210) LE Attach the MS GND sheet (64210) LE as shown in figure. Within 0.5mm Attaching standard The end of the case...
Page 26 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembling the SY-MS Protect Sheet (64210) Attach the SY-MS protect sheet (64210) as shown in figure. Attaching standard Characters Align the edge of the sheet with the outline of the flexible board. FP-2423 flexible board Align the end of the reinforcing plate with the end of the sheet.
Page 27 2023/12/29 03:11:18 (GMT+09:00) 4-2-6. BTH Assy [ 7 ] screw #368 (M1.4 X 3.0) [ 8 ] Strap (R) (64210) [ 10 ] Heat sheet (F) (64200) [ 9 ] (0.12 ± 0.01 N·m) Refer to "Notes on Assembling ST Block Assy Section the Heat Sheet (F) (64200)".
Page 28 2023/12/29 03:11:18 (GMT+09:00) Note 2 Notes on the EVF Block EVF block Do not touch this portion. SYS SET...
Page 29 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembly Notes on Assembling the Speaker (1) Arrange the cables as shown in the figure. Arrange the cable out of this range. Hooks Cables Notes on Assembling the Speaker (2) Arrange the cables as shown in figure. All the small holes in the speakers are visible.
Page 30 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembling the BT Insulating Sheet (64210) Attach the BT insulating sheet (64210) as shown in figure. Attaching standard BT-2030 flexible board BT insulating sheet (64210) Notes on Assembling the Heat Sheet (F) (64200) Attach the heat sheet (F) (64200) as shown in figure. Attaching standard RL-1062 board Connector...
Page 31 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembling the BT-2030 Flexible Board (1) Fold the BT-2030 flexible board as shown in figure. Valley fold Align the position Mountain fold of the outline. Align the position Peel the release paper. of the outline. Mountain fold (90°) BT-2030 flexible board Notes on Assembling the BT-2030 Flexible Board (2) Install the BT-2030 flexible board as shown in figure.
Page 32 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembling the Heat Sheet Tripod (64200) Attach the heat sheet tripod (64200) as shown in figure. Attaching standard Heat Sheet Tripod (64200) Notes on Assembling the BTH Assy Confirm after installing the BTH assy. BTH assy BTH assy There is There is no gap...
Page 33 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembling the EVF Block Assy After assembling the EVF Block Assy, check the following. ・ The gap between the Cabinet (Front) (Upper) and the top of the EVF being equal. ・ There is no level difference on the top of Cabinet (Front) (Upper) and the top of the EVF. Cabinet (Front)(Upper) Cabinet (Front)(Upper) ・...
Page 34 2023/12/29 03:11:18 (GMT+09:00) 4-2-7. ST Block Assy Front Assy Section [ 6 ] ST Block Assy Refer to "Notes on Assembling the ST Block Assy". Refer to "Notes on Assembling the SE-1016 Flexible Board (1) (2)". [ 4 ] PR flexible retainer (64200) [ 3 ] two screws (M1.4 X 1.4) [ 5 ] two screws...
Page 35 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembly Notes on Assembling the ST Block Assy Install the ST block assy as shown in figure. ST Block Assy Notes on Assembling the SE-1016 Flexible Board (1) Fold the SE-1016 flexible board as shown in figure. SE-1016 flexible board Valley fold Mountain fold...
Page 36 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembling the SE-1016 Flexible Board (2) Install the SE-1016 flexible board as shown in figure. Lightly press this portion. SE-1016 flexible board Confirm after installing the SE-1016 flexible board. This part is floating. SYS SET...
Page 37: Flash Unit
2023/12/29 03:11:18 (GMT+09:00) 4-2-8. Flash Unit [ 16 ] [ 12 ] ST aluminum cover (64200) [ 21 ] Protection sheet (L) (64200) [ 20 ] Protection sheet (R) (64200) [ 23 ] Interception sheet (64200) [ 9 ] Sheet lens cover (64200) [ 24 ] Flash unit Refer to "Notes on Assembling Refer to "Notes on Assembling...
Page 38 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembly Notes on Assembling the SE-1016 Flexible Board (1) Install the SE-1016 flexible board as shown in figure. Hook Hook Boss SE-1016 flexible board Peel the release paper and attach the flexible board. Attaching standard Notes on Assembling the SE-1016 Flexible Board (2) Attach the SE-1016 flexible board as shown in figure.
Page 39 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembling the Microphone Rubbers Attach the microphone rubbers as shown in figure. SE-1016 flexible board Attaching standard Attaching standard Microphone rubber Microphone rubber Do not overlap microphone Do not overlap in the hole. rubber microphone in the hole. rubber Notes on Assembling the Eye Sensor Cushion (64200) Attach the eye sensor cushion (64200) as shown in figure.
Page 40 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembling the Sheet Lens Covers (64200) Attach the sheet lens covers (64200) as shown in figure. Attaching standard Lens cover (64200) Within 1mm Within 1mm Within 0.5mm Within 0.5mm Sheet lens covers (64200) Notes on Assembling the Microphone Cushions Attach the microphone cushions as shown in figure.
Page 41 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembling the Gasket (ST) (64200) Attach the gasket (ST) (64200) as shown in figure. Gasket (ST) (64200) The end of the cushion is deeper The end of the cushion overlaps Adhesive surface is exposed. than this surface. this surface.
Page 42 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembling the Flash Unit When assembling the Flash Unit, use the shoehorn jig so that the FP-2424 Flexible Board is not damaged. Check that there is no damage on the FP-2424 Flexible Board. Insert the Flash Unit by tilting it into the hole of the ST case. Flash Unit FP-2424 Flexible Board Hole of the ST Case...
Page 43 2023/12/29 03:11:18 (GMT+09:00) 4-2-9. Cabinet (Front) (Upper) (64200) [ 22 ] Cabinet (front) (upper) (64200) [ 8 ] Gasket (F) (64200) Refer to "Notes on Assembling the Gasket (F) (64200)". [ 10 ] AF window (500) When assembling, adjust the position. [ 9 ] (Upper) inner assy (64200) [ 4 ] Plate [ 17 ] two screws...
Page 44 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembly Notes on Assembling the Gasket (F) (64200) Attach the gasket (F) (64200) as shown in figure. Attaching standard Gasket (F) (64200) Notes on Assembling the Insulating Sheet (ST shield) Attach the insulating sheet (ST shield) as shown in figure. Attaching standard Within 0.5mm Insulating sheet (ST shield)
Page 45 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembling the BB Cushion (64200) Attach the BB cushion (64200) as shown in figure. Attaching standard Within 0.5mm Within 0.5mm End of a board Do not extend from this line. Do not overlap to the mounting parts. RL-1062 board End of a board Mounting parts eria...
Page 46 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembling the Lens Ring Block Assy When assembling the Lens Ring Block Assy, Cabinet (Front) (Lower) and Cabinet (Front) (Upper), position with two pins and tighten the four screws. Cabinet (Front) (Lower) Hole Hole Cabinet (Front) (Lower) Hole Hole Pins...
Page 47 2023/12/29 03:11:18 (GMT+09:00) 4-2-10. EVF Block Assy (Service) [ 19 ] Cover block assy (64200) Refer to "Notes on Assembling the Cover Block Assy (64200) (1) (2)". [ 18 ] screw #276 (1.4 X 3.0)(Tapping) (0.10 ± 0.01 N·m) [ 8 ] two screws [ 20 ] EVF block assy (service) (M1.4 X 2.0) Refer to "Notes on Assembling...
Page 48 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembly Note on Assembling the EVF Block Assy (Service) Fold the EVF block assy (service) as shown in figure. EVF block assy (service) Mountain fold Valley fold Note on Assembling the ST-1044 Flexible Board (1) Fold the ST-1044 Flexible Board as shown in figure. ST-1044 Flexible Board Mountain fold Valley fold...
Page 49 2023/12/29 03:11:18 (GMT+09:00) Note on Assembling the Cover Block Assy (64200) (1) When tightening the screw, be careful not to tilt the Cover Block Assy (64200). VF Aluminum Cover VF Fixed Tube Screw Notes on Assembling the Cover Block Assy (64200) (2) Install the cover block assy (64200) as shown in figure.
Page 50 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembling the Insulating Sheet (Main Con) Attach the insulating sheet (main con) as shown in figure. Attaching standard Insulating sheet (main con) ST-1044 flexible board SYS SET...
Page 51: Main Frame Assy
2023/12/29 03:11:18 (GMT+09:00) 4-2-11. Main Frame Assy (64210) [ 3 ] LCD Panel Section [ 8 ] Cabinet (rear) assy (64210) [ 9 ] Control switch block (SW63900) [ 2 ] four screws #239 (M1.4 X 1.4) (0.12 ± 0.01 N·m (Note 1) [ 14 ] Frame sheet (64200) [ 13 ] Insulating sheet (64210) Refer to "Notes on Assembling...
Page 52 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembly Notes on Assembling the RE-1004 Flexible Board Fold the RE-1004 flexible board as shown in figure. RE-1004 flexible board Mountain fold 25.2mm Valley fold 18.5mm Notes on Assembling the RE (64210) Insulating Sheet Attach the RE (64210) Insulating sheet as shown in figure. Attaching standard RE (64210) insulating sheet RE-1004 flexible board...
Page 53 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembling the RE Protection Sheet (64200) (2) Attach the RE protection sheet (64200) as shown in figure. RE protection sheet (64200) RE protection sheet (64200) RE protection sheet (64200) Notes on Assembling the Insulating Sheet (64210) Attach the insulating sheet (64210) as shown in figure. Main frame assy (64210) Insulating Sheet (64210) Attaching standard...
Page 54: Hinge Assy
2023/12/29 03:11:18 (GMT+09:00) 4-2-12. Hinge Assy (64200) [ 21 ] Panel Section [ 2 ] LC flexible retainer (64200) Refer to "Notes on Assembling the LC Flexible Retainer (64200)". Install direction [ 1 ] Claws Red line [ 1 ] Claws [ 5 ] two screws [ 3 ] Sheet LC (pull magnet) (M1.4 X 2.0) (0.12 ±...
Page 55 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembly Notes on Assembling the Insulating Sheet (cabinet rear) Attach the insulating sheet (cabinet rear) as shown in figure. Attaching standard Cabinet (rear) plate (64210) Insulating sheet (cabinet rear) Notes on Assembling the Adhesive Sheet Cabinet (64200) Attach the adhesive sheet cabinet (64200) as shown in figure.
Page 56 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembling the LC Shield Sheet (64210) Attach the LC shield sheet (64210) as shown in figure. Attaching standard Half-blanked curve end Within 0.5mm Cabinet (rear) plate (64200) LC shield sheet (64210) Notes on Assembling the LC Flexible Retainer (64200) Attach the LC Flexible Retainer (64200) as shown in figure.
Page 57 2023/12/29 03:11:18 (GMT+09:00) 4-2-13. Panel Module (PK1-BTE) [ 8 ] Panel module (PK1-BTE) [ 7 ] Interception sheet (S) (64200) [ 6 ] Interception sheet (64200) [ 3 ] Sheet cabinet front (64200) Refer to "Notes on Assembling the Sheet (Cabinet Front) (64200)". [ 4 ] Adhesive sheet (LCD) (64200) [ 5 ] LC cabinet (front) (64200) [ 1 ] FP-2440 flexible board...
Page 58 2023/12/29 03:11:18 (GMT+09:00) Notes on Assembly Notes on Assembling the Sheet (Cabinet Front) (64200) Attach the sheet (cabinet front) (64200) as shown in figure. LC cabinet (front) (64200) Cross section Cross section Attaching standard Attaching standard Sheet (cabinet front) Sheet (cabinet front) (64200) (64200) Press and attach the...
Page 59: Lens Block
2023/12/29 03:11:18 (GMT+09:00) 4-3. Lens Block 4-3-1. Ornamental Ring A or Barrier Assy Replacing Method Removal Turn on the power switch and extend the lens (TELE end). Detach the battery. Apply alcohol to the gap of the Ornamental Plate using tweezers or fine-tipped stick as shown below. Detach the Ornamental Ring A.
Page 60: Installation
2023/12/29 03:11:18 (GMT+09:00) Installation Fit the four claws while inserting the barrier lever into the hole and attach the Barrier Block Assy. Claws Barrier Block Assy Hole Claws Barrier Lever Peel off the release paper of the Barrier Tape. Install the Ornamental Ring A and press it lightly. Ornamental Ring A Barrier Tapes Barrier Tapes...
Page 61: Section 5 Repair Parts List
2023/12/29 03:11:18 (GMT+09:00) Section 5 Repair Parts List 5-1. Note on Repair Parts (ENGLISH) NOTE: The components identified by mark or dotted line with • -XX, -X mean standardized parts, so they may have some mark are critical for safety. differences from the original one. Replace only with part number specified.
Page 62: Exploded Views
2023/12/29 03:11:18 (GMT+09:00) 5-2. Exploded Views Bottom Cabinet Section SY Board Section #368 (M1.4 X 3.0) (0.12 ± 0.01 N·m) #247 (M1.4 X 2.5) #368 (0.12 ± 0.01 N·m) (M1.4 X 3.0) (0.12 ± 0.01 N·m) Rear Cabinet Section #352 (M1.4 X 2.5) (0.12 ±...
Page 63: Sy Board Section
2023/12/29 03:11:18 (GMT+09:00) SY Board Section BTH Assy Section #290 (1.4 X 5.0)(Tapping) (0.10 ± 0.01 N·m) (M1.4 X 2.0) (0.12 ± 0.01 N·m) #209 (M1.4 X 3.5) (0.12 ± 0.01 N·m) Lens Block Section Part No. SP Description 473847101 SHEET (NFC) (64200), ADHESIVE 473232101 INSULATING SHEET (ST BOTTOM) 473012001...
Page 64 2023/12/29 03:11:18 (GMT+09:00) BTH Assy Section #368 ST Block Assy Section (M1.4 X 3.0) (0.12 ± 0.01 N·m) #189 (1.4 X 3.5)(Tapping) (0.12 ± 0.01 N·m) BT901 BT900 (1.4 X 4.0)(Tapping) (0.10 ± 0.01 N·m) #247 (M1.4 X 2.5) (0.12 ± 0.01 N·m) EVF Block Assy Section SP901 Part No.
Page 65 2023/12/29 03:11:18 (GMT+09:00) ST Block Assy Section Front Assy Section #247 (M1.4 X 2.5) (0.12 ± 0.01 N·m) (M1.4 X 1.4) #209 (0.12 ± 0.01 N·m) (M1.4 X 3.5) (0.12 ± 0.01 N·m) (Including MIC001 and MIC002) #333 (M1.4 X 1.4) (0.12 ± 0.01 N·m) Part No.
Page 66 2023/12/29 03:11:18 (GMT+09:00) Front Assy Section #209 (M1.4 X 3.5) (0.12 ± 0.01 N·m) #189 (1.4 X 3.5)(Tapping) #239 (0.08 ± 0.01 N·m) (M1.4 X 1.4) (0.12 ± 0.01 N·m) #209 (M1.4 X 3.5) (0.12 ± 0.01 N·m) Part No. SP Description Part No.
Page 67 2023/12/29 03:11:18 (GMT+09:00) EVF Block Assy Section #276 (1.4 X 3.0)(Tapping) (0.10 ± 0.01 N·m) (M1.4 X 2.0) (0.10 ± 0.01 N·m) C901 #276 #276 (1.4 X 3.0)(Tapping) (1.4 X 3.0)(Tapping) (0.10 ± 0.01 N·m) (0.10 ± 0.01 N·m) ANT901 (M1.4 X 2.0) (0.12 ±...
Page 68: Rear Cabinet Section
2023/12/29 03:11:18 (GMT+09:00) Rear Cabinet Section LCD Panel Section #239 (M1.4 X 1.4) (0.12 ± 0.01 N·m) FP-2440 FLEXIBLE BOARD (M1.4 X 1.4) (0.12 ± 0.01 N·m) #276 (1.4 X 3.0)(Tapping) (0.12 ± 0.01 N·m) Part No. SP Description 500056001 FRAME (64210), MIC 500056101 HOLDER (64210), MIC 500330701...
Page 69: Lcd Panel Section
2023/12/29 03:11:18 (GMT+09:00) LCD Panel Section LCD901 #239 (M1.4 X 1.4) (0.12 ± 0.01 N·m) (M1.4 X 2.0) (0.12 ± 0.01 N·m) Part No. SP Description Part No. SP Description NotSupplied PANEL BLOCK ASSY (64210) SERVICE 473016101 CABINET (FRONT) (64200), LC 473016701 SHEET (LCD) (64200), ADHESIVE 473017501 INSULATING SHEET (CASE), LC...
Page 70 2023/12/29 03:11:18 (GMT+09:00) Lens Block Section #305 (M1.4 X 4.0) (1.0 ± 0.10 N·m) #258 (1.2 X 3.5)(Tapping) (0.50 ± 0.05 N·m) (including IC1003 (CMOS imager) and CD-1011 flexible board) #176 (M1.2 X 2.0) (0.50 ± 0.05 N·m) #258 (1.2 X 3.5)(Tapping) (0.40 ±...
Page 71 2023/12/29 03:11:18 (GMT+09:00) 5-3. Accessories AC-UUD12 AC-UUE12 Part No. SP Description 149308318 AC Adaptor (AC-UUE12) (E32, IN5, AU2) 149308421 AC Adaptor (AC-UUD12) (CN1) 149308432 AC Adaptor (AC-UUD12) (CE3, RU3) 149308451 AC Adaptor (AC-UUD12) (KR2) 149308513 AC Adaptor (AC-UUD12) (UC2, TW6, J1) 149308561 AC Adaptor (AC-UUD12) (CEH, HK1) 183742711 Power cord (mains lead) (E32)
Page 72: Revision History
2023/12/29 03:11:18 (GMT+09:00) Revision History S.M. Rev. Ver. Date History Contents issued 2019.0 7 Official Release ― ― SYS SET...

This manual is also suitable for:

Dsc-rx100m7g

Sony DSC-RX100M7 Service Manual

Quick Links

Related Manuals for Sony DSC-RX100M7

Summary of Contents for Sony DSC-RX100M7

This manual is also suitable for:

Table of Contents