Preparation In Advance - Sony DSC-RX0 Help Manual

Help Guide
Digital Still Camera
DSC-RX0
Turning the camera on/off from a smartphone using the Bluetooth function
You can turn the camera on or off by operating a smartphone connected to the camera via the Bluetooth function.
You can connect multiple cameras to a smartphone simultaneously. Unlike with multiple connections via Wi-Fi, multiple
cameras are connected to the smartphone directly.
Supported smartphones
Android smartphones: Android 5.0 or later and compatible with Bluetooth 4.0 or later*
iPhone/iPad: iPhone 4S or later/iPad 3rd generation or later
*
As of September 2017. For the latest information, refer to the support site.
*
For the Bluetooth version, refer to the website for your smartphone.

Preparation in advance

Perform the following steps in advance.
1.
Install PlayMemories Mobile on your smartphone.
2.
Add the [Camera Remote Power ON/OFF] function to PlayMemories Mobile.
Connect the smartphone and the camera via Wi-Fi.
Once you have connected the camera via Wi-Fi, the [Camera Remote Power ON/OFF] function is added to
PlayMemories Mobile. You do not need to connect via Wi-Fi after the first time.
Bluetooth connection (Pairing)
The camera and the smartphone need to be connected via Bluetooth communication (pairing). This procedure is only
required once.
1.
Make sure that the camera's Bluetooth function is turned on.
You do not need to perform the pairing operation with the Bluetooth function at this point.
2.
On the camera, select MENU →
Also make sure that [
3.
On the camera, select MENU →
The device name of the camera "DSC-RX0" will be displayed on the monitor of the camera.
When a Bluetooth connection has already been established, the model name of the connected smartphone will
be displayed.
4.
Launch PlayMemories Mobile on your smartphone and select [Camera Remote Power ON/OFF].
The message [Scanning...] and a list of devices that can be connected will appear.
Perform the procedure under "Preparation in advance" if [Camera Remote Power ON/OFF] does not appear.
5.
Select [Pairing] to the right of "DSC-RX0" in the list on the smartphone.
6.
Select [OK] on the pairing confirmation screen on the camera.
7.
Select [Pairing] on the pairing confirmation screen on the smartphone.
(Network) → [Bluetooth Settings] → [Bluetooth Function] → [On].
Remote Power Set.] is set to [On] on the camera.
(Network) → [Bluetooth Settings] → [Pairing].
212