Table of Contents
Advertisement
Buffering (temporarily capturing a movie on the camera) starts once the shooting standby screen is displayed. When the
captured data fills the buffering capacity, old data is overwritten sequentially. When you press the SHUTTER/MOVIE
button, the camera starts to record a movie of the maximum recordable duration calculated retroactively from that point
on the memory card.
To redo shooting
You can cancel recording by selecting [Cancel] on the screen. However, the movie recorded up to the point you
cancelled will be saved.
Playback speed
The playback speed will vary as below depending on the assigned [
Frame Rate
240fps/250fps
10 times slower
480fps/500fps
20 times slower
960fps/1000fps
40 times slower
*
Only when [NTSC/PAL Selector] is set to NTSC.
[
Priority Setting] and recordable duration
Priority
Setting
Quality Priority
Shoot Time Priority
Playback time
For example, if you shoot for approx. 4 seconds with [
[960fps], and [
Priority Setting] set to [Shoot Time Priority], the playback speed will be 40 times slower and the
playback time will be approx. 160 seconds (approx. 2 minutes and 40 seconds).
*
Only when [NTSC/PAL Selector] is set to NTSC.
Related Topic
Shooting super-slow-motion movies (High Frame Rate)
Movie recording formats
Usable memory cards
Selecting the exposure mode for super-slow-motion shooting (Exposure Mode)
24p 50M*
30p 50M/25p 50M
8 times slower/10 times slower
16 times slower/20 times slower
32 times slower/40 times slower
Frame
Effective pixel number read out from image
Rate
240fps/250fps
1676×942
480fps/500fps
1676×566
960fps/1000fps
1136×384
240fps/250fps
1676×566
480fps/500fps
1136×384
960fps/1000fps
800×270
Frame Rate] and [
Record Setting
60p 50M/50p 50M
4 times slower/5 times slower
8 times slower/10 times slower
16 times slower/20 times slower
sensor
Record Setting] set to [24p 50M]*, [
123
Record Setting].
Recordable
duration
Approx. 2 seconds
Approx. 4 seconds
Frame Rate] set to
Advertisement
Table of Contents
