Table of Contents
Advertisement
4.
Input the password that is displayed on the camera.
The smartphone is connected to the camera.
Hint
Once the QR Code has been read, the camera's SSID (DIRECT-xxxx) and password are registered to the smartphone. This
enables you to easily connect the smartphone to the product via Wi-Fi at a later date by selecting the SSID.
Note
This product shares the connection information for [Ctrl w/ Smartphone] with a device that has permission to connect. If you want
to change the device that is permitted to connect to the product, reset the connection information by following these steps. MENU
→
(Network) → [Wi-Fi Settings] → [SSID/PW Reset]. After resetting the connection information, you must register the
smartphone again.
If you have performed [SSID/PW Reset] or [Edit Device Name] on the camera, you will be unable to establish a Wi-Fi connection
by scanning a previously scanned QR Code. In this case, display a new QR Code by selecting [
it.
When [Airplane Mode] is set to [On], you cannot connect this product and the smartphone. Set [Airplane Mode] to [Off].
Live view images may not be displayed smoothly on the screen of the smartphone depending on the surrounding radio wave
condition or smartphone performance.
Depending on future version upgrades, the operational procedures or screen displays are subject to change without notice.
Related Topic
PlayMemories Mobile
Controlling multiple cameras from a smartphone via Wi-Fi (Multiple connections)
202
Connection Info.] and rescan
Advertisement
Table of Contents
