A D D I P C A M E R A S - HIKVISION DS-76xxNI-Ex/xP Quick Start Manual

9
S E T U P H I K - C O N N E C T P 2 P C L O U D S E R V I C E ( c o n t i n u e d )
10

A D D I P C A M E R A S

Right click a window in Live View mode to display the menu.
1.
2. Click Menu to display Menu choices.
Click Cameras Setup to display the Add Cameras window.
3.
4. Add camera(s) as follows:
 Hikvision Camera Connected to Unit's PoE Port — Will automatically be added to an NVR
camera channel (D
 Hikvision Camera Connected to the Network but Not Unit's PoE Ports — Will automatically be
detected and displayed at bottom of the camera list in yellow. Must be added to an NVR camera
channel manually:
1) Click an unused camera channel's D
2) Click the EDIT (Pencil) button to display the Edit IP Camera window.
3) Use pull-down menu to change Adding Method from "Plug and Play" to "Manual."
4) Enter the camera's IP address and other information as required.
5) Press the OK button to add the camera.
 Hikvision Cameras Not Detected — Must be added manually:
1) Click an unused camera channel's D
2) Click the EDIT (Pencil) button to display the Edit IP Camera window.
3) Use pull-down menu to change Adding Method from "Plug and Play" to "Manual."
4) Enter the camera's IP address and other information as required.
5) Press the OK button to add the camera.
NOTE:
 Third-Party Cameras — Must be added manually:
1) Click an unused camera channel's D
2) Click the EDIT (Pencil) button to display the Edit IP Camera window.
3) Use pull-down menu to change Adding Method from "Plug and Play" to "Manual."
4) Enter the camera's IP address and other information as required.
5) Press the OK button to add the camera.
 If you do not have the device's QR Code: Enter the device information manually:
a. Click the Edit (pencil) icon on top right corner.
b. Enter device serial number (device must be online), then click the OK button.
c. When the device appears on the "Results" screen, click the Add button.
d. Enter device's 6-character Verification Code (all upper case), then click the OK button.
e. Click the Finish button.
x
) and will be visible on the camera list in white within two minutes.
If camera does not connect, use SADP program to find and modify camera
settings.
x
checkbox.
x
checkbox.
x
checkbox.