HIKVISION DS-76xxNI-Ex/xP Quick Start Manual page 13

1 2
S E T U P R E C O R D I N G ( c o n t i n u e d )
Analog Cameras

•



- Video Quality adjusts picture clarity (high setting = four green squares is default).
Consider highest if hard drive space allows. Medium setting is a balance between good
picture and saving HDD space.
- Frame Rate sets recording frame rate (8 fps on continuous and 15 on motion by
default). Higher frame rates require more storage, but allows better slow motion
playback.
- Max Bitrate Mode chooses between pre-set bitrate values and customized values
(General setting is default).
- Max Bitrate (kbps) is the chosen bitrate for streaming the video. Max Bitrate should be
adjusted to meet or exceed the rate recommended by the system for the chosen
parameters.
- Max Bitrate Recommended is impacted by resolution, quality, and framerate.
- Record Audio turns on audio recording (requires external mic or camera w/built in mic.
- Video Stream determines which stream is recorded. Leave at default (Main Stream).
Substream
1. Go to RECORDING CONFIGURATION > RECORD QUALITY > SUBSTREAM to set up
the Sub Stream to stream to mobile devices and display multiple cameras locally.
NOTE:
If the upload speed is not sufficient, lower the frame rate, bitrate,
and or resolution for more fluent mobile viewing.
 




 MAIN STREAM
Select tab
 CAMERA
Select analog camera
 EVENT
For event recording only (motion
or alarm)
CONTINUOUS
For live view image and
continuous recording
VIDEO QUALITY
Select number of green squares

to set quality (in example,
sensitivity is set to 3)

 SUBSTREAM TAB
Select
 CAMERA
Select camera
 STREAM TYPE
Select choice
 RESOLUTION
Can go up only to 4CIF
 VIDEO QUALITY
Select number of green squares
to set quality (in example,
sensitivity is set to 3)
