Table of Contents
Advertisement
3
L O C A L A C T I V A T I O N
System access requires a secure, user-assigned password.
4
I N I T I A L I Z E T H E H A R D D R I V E ( I F N E E D E D )
The system is set up to record upon power up and will beep and display "Do you want to initialize drive"
prompt if the hard drives are not initialized.
1.
Go to MENU > SYSTEM CONFIGURATION > HDD.
2.
Use the checkboxes to select the HDDs that need to be initialized.
3.
Press INIT. (Factory installed HDDs come initialized. Initializing again will erase any record video.
This does not affect settings).
Set Admin Password
Log In
First-time access requires user to create an
admin password.
1. Input same password in Create New
Password and Confirm New Password
text fields.
Strong Password REQUIRED
Password must contain 8 to 16 characters,
combining numbers, lower and upper case
letters, and special characters. At least two
types of the above-mentioned characters are
required. Also, reset password regularly.
2. Click OK to save password and activate
device.
1. User Name field will be prefilled with
"admin."
2. Input Password (account locks for 30
minutes after 7 incorrect attempts).
3. Click OK.
Advertisement
Table of Contents
