Table of Contents
Advertisement
R E A R P A N E L ( c o n t i n u e d )
No.
Item
1
Network Interfaces w/PoE
2
Audio In
3
Alarm I/O
4
LAN
5
Power Input
6
Power Switch
7
Fan
8
Audio Out
9
VGA Out
10
HDMI Out
11
USB
12
Grounding Screw
1
C O N N E C T D E V I C E S
1.
Connect AC power cord (DS-7608NI-E2/8P or DS-7616NI-E2/16P) or power supply plug
(DS-7604NI-E1/4P) to the NVR.
2.
Connect NVR to LAN using Cat 5e cable.
3.
Connect video monitor(s) to NVR using HDMI and/or VGA cables, as appropriate.
4.
Connect mouse to USB port (wireless mouse can be used in lieu of included mouse).
5.
Connect to audio I/O using RCA connectors.
2
S T A R T T H E N V R
1.
Plug AC power cord into 110 to 240 VAC outlet (surge suppressor is recommended).
2.
Turn power switch on. Power indicator LED will turn
After startup, power indicator LED will remain GREEN.
3.
Figure 4, DS-7616NI-E2/16P Rear Panel
Description
IP camera inputs and PoE outputs
RCA connectors
Alarm input/output connectors
Connector for LAN (Local Area Network)
A.C. power input
Switch for turning device on/off
Cooling fan
RCA connectors
DB-15 connector for VGA output (display local video output and menu)
HDMI video output connector
USB 3.0 port for additional devices
Ground
(WARNING: Needs to be connected when NVR starts)
GREEN
to indicate unit is starting.
Advertisement
Table of Contents
