Table of Contents
Advertisement
L C D D i s p l a y
A.1 Troubleshooting
To solve the following problems, you may need to refer to
Appendix A Standard Timing for compatible display
specifications.
Problem: Unclear or Unsteady Display
Actions:
Activate the AUTO button. You might need to repeat to find
balanced values for a good quality.
If the AUTO button cannot solve the problem, try to
manual fine tune following steps below:
1.
2.
3.
4.
Problem: No Display is shown on the LCD monitor.
Actions:
1.
Make sure the LCD monitor is powered on by checking if
the Power LED is lit. Check if all the connections are
secure and the system is running correctly.
2.
If the power LED lights up green, but there is still nothing
Appendix A Troubleshooting A-
If the image size does not fit the screen, adjust the
Size setting value under "Quality" menu.
If there is image pixel noise appears, adjust the
Phase setting value under "Quality" menu. Pull
and adjust the value bar to find out what is the best
clarity range for your LCD display.
If the image is not centered after step 1 and 2,
adjust Image Position under "Position" menu to
center the image.
If you still have problem to fine-tune the image, call
your local technical support for assistance.
2
O P D - 2 1 2 A / 2 1 5 A / 2 1 7 A
Advertisement
Table of Contents
