Table of Contents
Advertisement
L C D D i s p l a y s
Troubleshooting
To solve the following problems, you may need to refer to Appendix A
Standard Timing for compatible display specifications.
1.
Problem:
Actions:
2.
Problem:
Actions:
Industry LCD Display User's Manual
Unclear or Unsteady Display
Activate the AUTO button. You might need to
1.
repeat to find balanced values for a good quality.
If the AUTO button cannot solve the problem, try to
manual fine tune following steps below:
1.
If the image size does not fit the screen, adjust the
Size setting value under "Quality" menu.
2.
If there is image pixel noise appears, adjust the
Phase setting value under " Quality" menu. Pull and
adjust the value bar to find out what is the best clarity
range for your LCD display.
3.
If the image is not centered after step 1 and 2, adjust
Image Position under "Position" menu to center
the image.
4.
If you still have problem to fine-tune the image, call
your local technical support for assistance.
No Display is shown on the LCD monitor.
1.
Make sure the LCD monitor is powered on by
checking if the Power LED is lit. Check if all the
connections are secure and the system is running
correctly.
2.
If the power LED lights up green, but there is still
nothing displayed; connect your PC with another
O P D - 2 1 2 A / 2 1 5 A / 2 1 7 A
48
Advertisement
Table of Contents
