Vesa Wall Mounting - Aaeon OPD-215A Manual

L C D D i s p l a y

2.8 VESA Wall Mounting

Mounting the Panel PC (Optional) for use only with UL Listed
Wallmount Bracket. The Panel PC can be mounted on a monitor
arm or wallmount plate.
Caution:
When mounting the monitor, take care to tighten the retention
screws or bolts until fully secured, but do not over tighten. Over
tighting the retention screws or bolts my cause them to become
stripped, rendering them useless.
Monitor Arm or Wallmount Plate Installation
The Panel PC has Video Electronics Standards Association
(VESA) standard mounting holes tapped into the rear panel.
The standard holes are M4 set at 100mm x 100mm apart.
Chapter 2 Hardware Installation
O P D - 2 1 2 A / 2 1 5 A / 2 1 7 A
2-10