Table of Contents
Advertisement
L C D D i s p l a y
The first time you start Windows with a new monitor, the
system will detect OPD display and automatically detect and
install the Plug-and-Play device driver.
However, manual installation might be needed when your
video card does not comply with DDC1/DDCB2 standard, the
system can only detect Windows Default Monitor, not the
OPD displays.
When your system detects Windows Default Monitor or
cannot detect the display at all, follows the step-by-step
installation guide below. The drivers for manual installation
are provided in the supporting CD-ROM.
4.1 Display Driver Installation
Windows 98
1.
Insert the supporting CD-ROM into your CD-ROM Driver.
2.
Click "Start" button and look for "Control Panel" under
"Settings" menu.
Chapter 4 Driver Installation
4-2
O P D - 2 1 2 A / 2 1 5 A / 2 1 7 A
Advertisement
Table of Contents
