Table of Contents
Advertisement
L C D D i s p l a y
2.6 Serial Port Connector For Touch
It is a DB-9 COM Port connector. The following table shows the
pin-out assignments of this connector.
Pin
Signal
Not Used
1
TXD, Transmit Data
3
GND, Ground
5
Not Used
4
Not Used
5
2.7 VESA Wall Mounting
Mounting the Panel PC (Optional) for use only with UL Listed
Wallmount Bracket. The Panel PC can be mounted on a monitor
arm or wallmount plate.
Caution:
When mounting the monitor, take care to tighten the retention
screws or bolts until fully secured, but do not over tighten. Over
tighting the retention screws or bolts my cause them to become
stripped, rendering them useless.
O P D - 2 1 5 E
Pin
Signal
RXD, Receive Data
2
Not Used
4
Not Used
8
Not Used
9
Not Used
10
Chapter 2 Hardware Installation
2-7
Advertisement
Table of Contents
