Download Print this page

Calibration Kits - Agilent Technologies E5072A Configuration Manual

Ena series network analyzer 30 khz to 4.5/8.5 ghz

Advertisement

Test Accessories and Calibration Kits
Test accessories and calibration kits that can be used with the E5072A are listed in this section. A complete line of test
accessories and calibration kits can be found at the Agilent RF and Microwave Test Accessories Web site:
www.agilent.com/find/accessories
Test accessories
Test accessories such as test port cable are necessary for a complete measurement system using the E5072A. Order test
accessories in accordance with the desired measurement system.

Calibration kits

Calibration is an accuracy enhancement procedure that effectively reduces the system errors that cause uncertainty in
network measurement. Calibration kit is necessary to perform the calibration.
• Mechanical calibration kits include standards, such as opens, shorts and loads, which are measured by the network
analyzer. Choose a calibration kit for each connector type to be used.
• Electronic calibration (ECal) modules replace mechanical calibration standards with one solid-state calibration module
that is controlled by the network analyzer via USB. ECal modules provide many different impedances to the test ports
which enables a full two-port calibration to be performed quickly with a single connection. This technique reduces
operator errors and connector wear and abrasion.
Test accessories
Model No
Test port cable
N6314A
N6315A
11500E
11500F
Accessory kit
11853A
Adapter kit
11878A
Active probe
85024A
Description
50 Ω type-N (m) to type-N (m) cable, DC to 12.4 GHz, 61 cm (24 in)
50 Ω type-N (m) to type-N (f) cable, DC to 12.4 GHz, 61 cm (24 in)
3.5 mm (m) to 3.5 mm (m) cable, 61 cm (24 in)
3.5 mm (m) to 3.5 mm (m) cable, 152 cm (60 in)
50 Ω type-N accessory kit. Includes;
● Type-N (f) to type-N (f) adapter (2 qty.)
● Type-N (m) to type-N (m) adapter (2 qty.)
● Type-N (f) short
● Type-N (m) short
50 Ω type-N to 3.5 mm adapter kit. Includes;
● 3.5 mm (m) to type-N (m) adapter
● 3.5 mm (f) to type-N (f) adapter
● 3.5 mm (f) to type-N (m) adapter
● 3.5 mm (m) to type-N (f) adapter
300 kHz to 3 GHz active probe. Includes;
● Probe tip to type-N Adapter
● 10:1 divider
● Hook tip adapter
● Slip-on tip adapter
● Leads
4

Advertisement

loading