If You Need Assistance - Maytag MDE20PNAGW Installation Instructions Manual

Commercial gas or electric dryer
Hide thumbs Also See for MDE20PNAGW:
Table of Contents

Advertisement

MAINTENANCE INSTRUCTIONS
Clean lint screen before and after each cycle.
Removing accumulated lint:
From inside the dryer cabinet:
Lint should be removed every 2 years or more often,
depending on dryer usage. Cleaning should be done by
a Whirlpool authorized person.
From the exhaust vent:
Lint should be removed every 2 years, or more often,
depending on dryer usage.
Keep area around dryer clear and free from combustible
materials, gas, and other flammable vapors and liquids.
Keep dryer area clear and free from items that would
obstruct the flow of combustion and ventilation air.
WARNING:
Improper connection of the equipment-earthing conductor can result in a risk of electric
shock. It is your responsibility to check with a qualified electrician or service representative if you are in doubt
as to whether the dryer is properly earthed and meets all local codes and ordinances. Do not modify the plug
provided with the dryer: If it will not fit the outlet, have a proper outlet installed by a qualified electrician.

IF YOU NEED ASSISTANCE

If you need help, contact the dealer from whom you purchased the appliance, or a Maytag designated service company. When
calling, please know the purchase date and the complete model and serial number of your appliance. This information will help us to
better respond to your request.
IF YOU NEED SERVICE:
Contact your authorized Maytag Commercial Laundry distributor. To locate your authorized Maytag Commercial Laundry distributor,
visit www.MaytagCommercialLaundry.com.
6
For written correspondence:
Maytag Commercial Laundry Service Department
2000 N M 63
Benton Harbor, Michigan 49022-2632 USA
If dryer does not operate, check the following:
Electrical supply is connected.
Circuit breaker is not tripped or house fuse is not blown.
Door is closed. Listen closely to hear the door switch
activate.
Controls are set in a running or "on" position.
For gas dryers, check that gas supply shut-off valves are
set in open position.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents