Set The Communication Port In Windows; Check Your Eagleeye Iii Camera Configuration; Control The Eagleeye Iii Camera In Realpresence Capture Station Software - Polycom RealPresence Capture Station Pro Administrator's Manual

®
Polycom RealPresence
7 In the Input section, select Component Input 1 from the drop-down list.
8 Click OK to close the dialog and return to the People Capture screen.
9 On the People Capture screen, click Save.

Set the Communication Port in Windows

Check the communication port assigned to the USB Serial Controller in Windows on the RealPresence
Capture Station Pro appliance. The port number must match the COM number you selected in the
RealPresence Capture Station software.
To set the communication port:
1 In the Start menu, right-click Computer and choose Manage.
2 Click Device Manager from the tree on the left side.
3 Expand Ports (COM & LPT).
4 Locate USB Serial Controller and note the COM number next to it. This number must match the
COM number you selected in the RealPresence Capture Station software.

Check Your EagleEye III Camera Configuration

After connecting and configuring your EagleEye III camera, verify that it is working in the Capture Sources
window.
To display the Capture Sources window and check your configuration:
» Click Show Sources on the RealPresence Capture Station Pro start screen. You will see a live
image from the EagleEye III camera if it is connected and configured correctly.
Control the EagleEye III Camera in RealPresence
Capture Station Software
You can control your Eagle Eye III camera using the Eagle Eye remote in the Capture Sources window.
To display the Capture Sources window, click Show Sources on the RealPresence Capture Station Pro
start screen.
Polycom, Inc.
® Capture Station Pro Administrator's Guide
6.6
88