Configure The Publish Point Manually - Polycom RealPresence Capture Station Pro Administrator's Manual

®
Polycom RealPresence
b In the Firewall Options dialog, shown next, select Off (if you do not have a proxy/firewall) or
On (if you have a proxy/firewall) for Firewall Support.
c Select a Firewall Type, and complete the remaining fields.
d Click OK when you are finished.
5 On the Publish Point page, click the Test SFTP Connection button to verify that the SFTP Upload
Settings are correct.
6 Click Save.

Configure the Publish Point Manually

If your RealPresence Capture Station appliance is integrated with a RealPresence Media Manager
software installation, you can configure the appropriate web content publish point manually (without using
the Media Manager Wizard).
For information on using the Media Manager Wizard, see
Manager Wizard for the First
To configure the web content publish point manually for RealPresence Media Manager and MSA:
1 On the Publish Point page, in the Web Content Publishing section and to the right of Upload
Type, select MSA.
2 In the Media Manager MSA section, enter the MSA URL from which you are serving content. If the
content is in a subfolder, enter the subfolder name in the Subfolder field, and add the subfolder
name to the web server URL manually.
3 Click the Test MSA button to verify that the RealPresence Capture Station can connect to the
location on the MSA.
Polycom, Inc.
® Capture Station Pro Administrator's Guide
Time.
Use the Polycom RealPresence Media
6.6
58