Enable The Web Controller - Polycom RealPresence Capture Station Pro Administrator's Manual

®
Polycom RealPresence

Manual / Pre-Publish Your presentations are saved into a folder that you name, and
optionally pre-publish, before you start the presentation.
4 In the Capture Station section, enter a unique Station Folder ID. You can use any alphanumeric
text that identifies and describes the RealPresence Capture Station appliance used to create the
presentation.
5 Enter the Station ID, a unique ID assigned to each RealPresence Capture Station Pro appliance
(see the following Admin Tip). Note that you cannot change the Station ID. To copy the Station ID
if, for example, you want to paste the Station ID manually into RealPresence Media Manager
software, click
6 Click Save when you are finished editing project options.
Admin Tip: Using Station Folder IDs
Use descriptive station IDs to help identify RealPresence Capture Station appliances when they are
being controlled from RealPresence Media Manager software. For example, use a station ID such
as Room101 to identify a RealPresence Capture Station appliance in room 101, and differentiate it
from an appliance in another room.

Enable the Web Controller

You can use the Web Controller feature to control the RealPresence Capture Station appliance from a
web browser, using the URL and port number. For example, once enabled, you could control the
RealPresence Capture Station appliance by entering the URL for the localhost, http://127.0.0.1:81/, in the
address bar of a web browser. You can access the RealPresence Capture Station appliance using the
machine's IP address or a Fully Qualified Domain Name (FQDN).
Polycom, Inc.
® Capture Station Pro Administrator's Guide
.
6.6
43