Configure Image Output Settings; Set The Image Compression Quality - Polycom RealPresence Capture Station Pro Administrator's Manual

®
Polycom RealPresence
2 Click the Edit button, as shown.
3 In the Add Motion Detection Profile screen, configure the desired settings.
4 Click Save.
Note: You Cannot Edit Default Motion Detection Profiles
The default motion detection profiles cannot be edited. If you attempt to edit a default profile, a
dialog displays with a message indicating that you cannot edit a default profile. The message dialog
asks if you would like to add a new profile based on the selected one. If so, click Yes.
To delete a motion detection profile:
1 On the Content Capture page, from the Motion Detection Profile drop-down list, select a profile
to delete.
2 Click Remove.
3 Click Save.
Note: You Cannot Delete the Default Motion Detection Profile
The default motion detection profiles cannot be deleted. If you attempt to delete a default profile, a
dialog displays with the message "Unable to remove motion detection profile." Click OK to close the
dialog.

Configure Image Output Settings

You can configure the quality of the screen capture images that will be output to your web portal, select or
deselect the thumbnail generation option, and trim the screen captures that will be output to exclude
unnecessary portions of the screen, such as your operating system's task bar.

Set the Image Compression Quality

Configure the quality of the screen capture images that will be output to your web portal by setting the
image output compression quality.
To set the image output compression quality:
1 On the Content Capture page, in the Image Output Compression Quality section, use the
compression slider to select the JPG compression you want.
Polycom, Inc.
® Capture Station Pro Administrator's Guide
6.6
39