Advertisement
PIN 4
PIN 9
PIN 11
PIN 12
PIN 13
PIN 14
PIN 15
EXIT
FORMAT DISPLAY
TIMECODE
KEY LOCK
PICTURE DEALY
BACKLIGHT
CHARACTER DISPLAY
LOCATIONS
SETUP
ENTER
SIZE
COLOR
FACTORY DEFAULT
RESTORE USER CONFIG
LOAD USER CONFIG
Installation and User's Guide
default: G ONLY
default: B ONLY
default: MONO
default: MARKER
default: ASPECT
default: SCAN
default: HV DELAY
Return to Level 1
AUTO / ON / OFF, default: AUTO
OFF / LTC / VITC1 / VITC2, default: OFF
LOCK / UNLOCK, default: UNLOCK
NORMAL / FAST / FASTEST, default: NORMAL
0% ~ 100%, default 80%
ON / OFF, default: OFF
CENTER TOP / CENTER BOTTOM,
default: CENTER TOP
USER ASSIGN
SMALL / LARGE, default: SMALL
YELLOW / RED / BLACK, default: YELLOW
PROCEED / CANCEL, default: CANCEL
PROCEED / CANCEL, default: CANCEL
PROCEED / CANCEL, default: CANCEL
12
2.3.3.
CONTRAST
Adjust visual color contrast.
Press Contrast Knob, CONTRAST OSD will be displayed on the screen.
Rotate it clockwise: Contrast increase.
Rotate it counterclockwise: Contrast decrease.
Press it again, return to default value (80).
Adjustable range: 0~100%, default: 80.
2.3.4.
CHROMA
Adjust visual color chromaticity.
Press Chroma Knob, CHROMA OSD will be displayed on the screen.
Rotate it clockwise: Chroma increase.
Rotate it counterclockwise: Chroma decrease.
Press it again, return to default value (50).
Adjustable range: 0~100%, default: 50.
2.3.5.
ASPECT
Switch the aspect ratio of screen.
Whenever Aspect button is pressed, aspect ratio will be switched as follows.
4:3->16:9->OFF.
Default: OFF.
2.3.6.
MENU
Activate and exit the OSD menu.
Press MENU button, OSD menu will be displayed on the screen.
Rotate Chroma knob clockwise: move down.
Rotate Chroma knob counterclockwise: move up.
Press Chroma knob: select value or enter into sub-menu.
2.3.7.
SCAN
Switch the scan mode of monitor
Whenever Scan button is pressed, scan mode will be switched as follows.
Normal->Over->Zoom.
Default: Normal.
Installation and User's Guide
9
Advertisement
