Advertisement
5. Mechanical Drawing
5.1. Dimension[Units :mm] for OIC-7002
FIGURE 1. OIC-7002
Installation and User's Guide
14
Notes: #5, #6, #7, #8, #10 pins must be connected to GND.
○
5 Service Port: Port for firmware upgrade with Service Card (Optional).
2.2.2.
GPI Connection
Turn off the power button.
Connect a D-SUB15 connector to GPI connector.
Turn on the power button.
2.2.3.
Service Card Connection
Turn off the power button.
Insert the service card to service port.
Turn on the power button.
Service Card is optional.
Installation and User's Guide
#1
#6
#11
7
Advertisement
