Displayport Output Setting - JVC CL-S200 Installation Manual

DisplayPort setting
You can reduce power consumption by selecting "Enable" for DP OUT on INFORMATION
2/2 when using only DVI (DisplayPort isn't used at all).
With this setup, DisplayPort OUT connector doesn't work.
Setting method
1) Activate "Operation Button Guide ① " by pressing any operation buttons but the
Standby (Power) button ＿
2) Press the "MENU" button.
3) Select "DP POWER" on "MENU 2/2" by using the "▲" button or the "▼" button, and
press the "OK" button.
Secondly, select "Disable" or "Enable" on OSD "DP POWER", and press the "OK"
button.
You can check the status (DisplayPort output is on or off) on "DP" in "INFORMATION
2/2".
.
DisplayPort setting
.
I N F O R M A T I O N
T - P A T T E R N :
D P
U S B P O W
F U N C - 1
F U N C - 2
F U N C - 3
- 26 -
INFORMATION 2/2
A A P M T G 1 8 - O I Q
: E n a b l e
: A u t o
: T E S T P A T T E R N
: D Y N A M I C G A M M A
: D i s a b l e
2 M P
2 / 2