Attaching An Arm Stand - JVC CL-S200 Installation Manual

Attaching an arm stand

The tilt stand is interchangeable with commercially available
arms that:
• Come with a mount plate with 4 slotted screw holes at
100 mm x 100 mm, and
• Bear the total weight of the LCD panel (without the stand)
and the cables connected to it. For more information,
ask the arm maker.
Use the original screws to use the LCD panel back on its original tilt stand.
Note
Caution
Choose the screw size carefully according to the plate thickness. If the screws
are too long, they could damage the internal parts. If they are too short, the
connection becomes loose and the monitor could fall off.
Mounting plate thickness
Note: We are not liable for any damage or injury resulting from replacing stands.
How to attach an arm stand
1
Place a soft cloth or cushioning material over a stable even surface.
2
Put the monitor face down on the soft cloth.
3
Remove 4 screws and detach the tilt stand, using a Phillips head screwdriver.
4
Attach an arm stand.
Note Do not try to attach the panel to the arm that is already fixed in place by
yourself. Ask for assistance from another person. Tipping the panel over or
dropping it could cause damage and/or injury.
3.5 - 4.5 mm
1.5 - 3.5 mm
Below 1.5 mm
Cushioning
material
Screw size
ISO M4 x 12
ISO M4 x 10 (Originally used)
ISO M4 x 8
- 32 -