JVC CL-S200 Installation Manual page 28

The supplied USB cable can also be used for the followings:
• To calibrate the monitor (An optional calibration kit is required.)
• To calibrate multiple monitors in succession
To calibrate the monitor
●
Connect the supplied USB cable between one of the monitor's UP's and the
computer's USB down port. For more information, refer to the instruction manual for
the calibration kit.
To calibrate multiple monitors in succession
●
Up to 6 monitors can be connected one after another in a daisy chain using USB
cables.
1
Connect the supplied USB cable between the first monitor's USB UP and the
computer's USB port.
2
Connect a USB cable between the first monitor's USB DOWN and the second
monitor's USB UP.
3
Repeat step 2 until all monitors are connected one after another.
Computer
3rd
6th
- 28 -
2nd
5th
1st
4th