Auto Text Mode Function - JVC CL-S200 Installation Manual

Auto text mode function

CL-S200 comes with the function called "Auto text mode", which automatically detects
a text window (white window) used for showing information such as report and patient
list, and reduces its luminance depending on the size of the display area of the window.
If a text window is displayed too brightly on the screen of a high-luminance medical
display it becomes hard to view. This function reduces luminance of the window and
helps reduce eyestrain.
The default is "Disable", but by OSD operation can change it to "Enable."
Text window
(normal: too bright)
When "Enable" is set up for Auto Text, the indicator blinks to show
the brightness level on top of the screen. The luminance is reduced
depending on the size of the display area.
Setting method 1
You can turn on and off AUTO TEXT MODE by OSD.
1） Activate "Operation Button Guide ① " by pressing any operation buttons but the
Standby (Power) button ＿
2) Press the "MENU" button.
3) Select "AUTO TEXT MODE" by using the "▲" button or the "▼" button, and press
the "OK" button.
Secondly, select "Disable" or "Enable" on OSD "AUTO TEXT MODE", and press the
"OK" button.
Setting method 2
You can make function buttons (F1~F3) available.
Text window
(with its luminance reduced)
Image of the "Auto text mode" function
.
- 20 -
Indicator