How to display the Test pattern
To display the Test pattern to check the image quality prior to the use of the monitor,
press the button located in the
Select test pattern
1) Activate "Operation Button Guide ① " by pressing any operation buttons but the
Standby (Power) button _
2) Press the "MENU" button.
Select "TEST PATTERN" on "MENU 1/2" by using the "▲" button or the "▼" button,
3)
and press the "OK" button.
And then, OSD
"TEST
Select the proper test pattern from "SMPTE pattern" or "AAPM
and press the "OK" button.
Default of test pattern depends on the sold market.
Destination
North America
Europe
SMPTE pattern
Setting method
You can make function buttons (F1~F3) available to display test patterns.
The following steps tell you how to functionalize the "F1" button to turn on and off the
display.
1) Activate "Operation Button Guide ① " by pressing any operation buttons but the
Standby (Power) button _
2) Press the "MENU" button.
3)
Select "FUNCTION" on "MENU 1/2" by using the "▲" button or the "▼" button,and
press the "OK" button.
front
of the monitor as follows.
.
PATTERN" appears.
SMPTE pattern
AAPM
TG18-OIQ
.
- 24 -
TG18-OIQ
Test pattern
pattern
AAPM
TG18-OIQ
pattern",
pattern