Connections Setting - JVC KW-M785DBW Instruction Manual

In-Car Connections In-Car Connections
Adding the registered devices
1
Display the <Device List> screen.
From the Home screen (page 3), touch as
follows:
Then, on the <Settings> screen, touch as follows:
[System] → <Connections SETUP> : [Enter]
On the <Connections SETUP> screen, touch as
follows:
<Device List> : [Enter]
2
Activate registration.
On the <Device List> screen:
3
Follow the procedure previously
explained.
• Pairing a Bluetooth device using SSP
(for Bluetooth 2.1), see page 7.
• Pairing a Bluetooth device using a PIN code
(for Bluetooth 2.0), see page 8.
10 ENGLISH
Deleting the registered devices
1
Display the <Device List> screen.
From the Home screen (page 3), touch as
follows:
Then, on the <Settings> screen, touch as follows:
[System] → <Connections SETUP> : [Enter]
On the <Connections SETUP> screen, touch as
follows:
<Device List> : [Enter]
2
Display the <Device Remove> screen.
On the <Device List> screen:
3
Select the device you want to delete.
Device Remove
All CP Device 1
All
Device 2
Delete
Device 3
AAP Device 1
BT Device 1
• To select all devices, touch [
• To deselect all devices, touch [
4
Touch [Delete].
A warning message appears. Touch [Yes] to delete.

Connections setting

You can change various settings for the connected
devices.
1
Display the <
From the Home screen (page 3), touch as
follows:
Then, on the <Settings> screen, touch as follows:
[System] → <Connections SETUP> : [Enter]
On the <Connections SETUP> screen, you can
change and confirm the following item settings.
• For list/setting screen operations, see also page
13.
Connections SETUP
Device List
PIN Code
Device Name
Bluetooth Device Address
Initialise
TEL SET-UP
Connections SETUP
Wi-Fi Setup
Device Audio Control
].
Driving Position
].
Android Mode Select
Reset Android Auto Wireless Connection
> screen.
Connections SETUP
Enter
0000
(Model name)
00:00:00:00:00:00:00
Enter
Enter
Enter
Enter
Left Right
Enter
Enter