Table of Contents
Advertisement
DISMOUNTING THE BIKE
WARNING! Do not dismount the bike or remove your feet
from the pedals until the pedals have stopped completely.
You can stop the flywheel at anytime by pushing down on
Brake Knob (No. 31).
ADJUSTING THE HANDLEBAR
Loosen the [handlebar adjustment] Knob (No. 16) to raise or
lower the handlebar to the desired position. Make sure the
Knob (No. 16) settles into the desired hole and secure it
firmly by turning clockwise. See Figure A.
Loosen the L Shaped Knob (No. 27) to move the handlebar
forward or backward to the desired position. Once the
handlebar is in the desired position, firmly secure the L
Shaped Knob (No. 27) by turning clockwise. See Figure B.
ADJUSTING THE PEDAL STRAP
Place the ball of each foot in the toe clips so the front of your
shoe fits snuggly in the toe clip cage. Rotate one foot to
within arm's reach and pull the strap until the top clip cage
fits your shoe snuggly. Insert the strap back into the hoop of
the toe clip. Repeat this for the other foot.
MOVING THE BIKE
To move the bike, first ensure that the handlebar is properly
secured.
If the handlebar is loose, tighten the Knob to
secure it. Next, stand at the front of the bike so that you're
directly in front of the handlebar. Firmly grasp and hold each
side of the handlebar, place one foot on the front stabilizer
and tilt the bike towards you until the transportation wheels
on the front stabilizer touch the ground. With the wheels on
the ground, you can transport the bike to the desired location
with ease.
9
Hide quick links:
Advertisement
Table of Contents
