Magnetic belt drive indoor cycling bike (15 pages)
Summary of Contents for Sunny Health & Fitness SF-B1970
Page 1
BELT DRIVE PRO LITE INDOOR CYCLING BIKE SF-B1970 USER MANUAL IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED or 1- 877 - 90SUNNY (877-907-8669).
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly.
Page 6
ASSEMBLY INSTRUCTIONS We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669). STEP 1: 26 M8*20*S6 4PCS 27 d8 4PCS A S6 1PC 28 d8*Φ16*1.5 4PCS Remove 2 Bolts (No.
Page 7
We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669). STEP 2: 36 M10*35 2PCS 37 M10 2PCS Connect Trunk wire (No. 11) with Sensor Wire (No. 12) 39 M5*10*Φ10 1PC (Figure A).
Page 8
We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669). STEP 4: 39 M5*10*Φ10 2PCS 87 d5*φ10*1.0 2PCS A S6 1PC Remove 2 Screws (No. 39) and 2 Washers (No. 87) from Main Frame (No.
BATTERY INSTALLATION AND REPLACEMENT Battery Battery cover BATTERY INSTALLATION 1. Take out 2 AAA batteries from computer box. 2. Press the buckle of battery cover on the back of the Computer (No. 10), then remove battery cover. 3. Install 2 AAA batteries into the battery case on the back of the Computer (No. 10). Pay attention to the battery + and –...
Page 10
ADJUSTMENTS & USAGE GUIDE TENSION ADJUSTMENT: Increasing or decreasing the tension allows you to add variety to your workout sessions. There are 7 levels resistance. Level 1 is the lowest and level 7 is the highest. To increase the tension, press the Tension and Brake Handle (No.
Page 11
HANDLEBAR ADJUSTMENT: To adjust the height of Handlebar (No. 6), loosen counter-clockwise and pull out the L Knob (No. 18), then slide Figure A the Handlebar Post (No. 2) up or down to the desired height (Figure A). Once adjusted, tighten the L Knob (No. 18) to clockwise secure the Handlebar Post (No.
EXERCISE COMPUTER FUNCTION BUTTON: MODE: 1. Press the button for selection function display value on the computer. 2. Press the button and hold for 2 seconds to reset all values except odometer to zero. Note: When the user replaces the batteries, all the values will reset to ZERO automatically. OPERATIONS: AUTO ON/OFF: The computer will show the workout value automatically as the user begins to exercise.
MAINTENANCE INSTRUCTIONS This is general information for daily, weekly, and monthly maintenance to be performed on your bike. DAILY MAINTENANCE MONTHLY MAINTENANCE After each exercise session, wipe down all the 1. Check if all hardware is secure, such as: bottle equipment: seat, frame, and handlebars.
Need help?
Do you have a question about the SF-B1970 and is the answer not in the manual?
Questions and answers