Siemens SIMATIC ET 200SP HA Manual page 32

Technical specifications
Article number
Digital inputs
Number of digital inputs
Digital inputs, parameterizable
Type
Pulse extension
Time stamping
Time stamp (with precision of 1 ms)
Edge evaluation
Signal change flutter
Flutter observation window
Input voltage
● Type of input voltage
● Rated value (DC)
Input current
for 10 k switched contact
for unswitched contact
for NAMUR encoders
Input delay (for rated value of input voltage)
● tolerated changeover time for changeover
for NAMUR inputs
Cable length
● shielded, max.
● unshielded, max.
Encoder
Connectable encoders
● NAMUR encoder/changeover contact
● Single contact / changeover contact
● Single contact / changeover contact
● 2-wire sensor
32
– for signal "0"
– for signal "1"
– for signal "0", max. (permissible
quiescent current)
– for signal "1"
– for signal "0"
– for signal "1"
contacts
– at "0" to "1", max.
– at "1" to "0", max.
according to EN 60947
unconnected
connected with 10 kΩ
6DL1131-6TH00-0PH1
16
Yes
NAMUR
Yes; 0.5 s, 1 s, 2 s
Yes
No
Yes; rising edge, falling edge, edge change
Yes; 2 to 32 signal changes
Yes; 0.5 s, 1 s to 100 s in 1-s steps
DC
8.2 V
0.35 to 1.2 mA
2.1 ... 6.4 mA
0.5 mA
typ. 8 mA
0.35 to 1.2 mA
2.1 ... 6.4 mA
300 ms
17 ms
25 ms
600 m
200 m
Yes
Yes
Yes
Yes; Acc. to NAMUR
Digital Input Module DI 16xNAMUR HA (6DL1131-6TH00-0PH1)
Manual, 11/2017, A5E39293880-AB