Introduction - Rice Lake iRite 920i Operation Manual

1.0

Introduction

The 920i Rate of Gain Program is available in either static or mobile versions. The mobile version includes an
inclinometer that will cause the screen to go blank when scale is at an angle over three degrees.
The 920i Rate of Gain Program can be used to weigh animals and store the weighments for download to a PC. Up
to 500 animals with three weighments per ID may be stored (total of 1500 transactions). This program can be used
with a 920i weighcenter or a stand-alone 920i.
This program is written to interface with an Allflex RS420 Stick Reader connected to the 920i serial port 3 (RS-
232). Bluetooth or wired connection is available. Connect the stick reader to the indicator according to the stick
reader manual.
RF Tag Reader needs to be set at:
• 9600 baud
• 8 bits no parity bit
• 2 stop bits
For more information about the 920i indicator, refer to the 920i Technical Manual.
Authorized distributors and their employees can view or download this manual from the Rice Lake
Weighing Systems distributor site at
Warranty information can be found on the website at
www.ricelake.com/manuals
www.ricelake.com/warranties
Introduction 1