Yale Keyless Connected Smart Lock Installation Manual

20mm Hole
Contents Include
Fit Yale digital lock using hand Philips screw driver to avoid cross threading xing screws.
If using a cordless, please ensure it is set to low speed & torque.
Front Body Battery Pack Handing Plate
Before re r g e g e etting started
Did you purchase the r rchase the Y Yale Digital Lock including a Y3 Nightlatch Yale Digital Lock including a Y3 Nightlatch
YES , I have bought the complete package to install them onto my door.
➞ Please start from installation step
ON THE RIGHT PAGE
NO , I am going to keep using the existing Nightlatch on my door with the Yale digital product.
➞ There are many types of Nightlatches, so please start from installation step
follow the check points for correct installation.
Check Point!!!
Please use the key of your existing Nightlatch and check the below
Ⓐ Keep your door open
Ⓑ Insert the key in the outside cylinder key hole
Ⓒ Turn the key 90° in either direction counter clockwise(to the left) and
check the latch fully retracts
Ⓓ Turn the key 90° in either direction clockwise(to the right) and check the latch fully retracts
Can you open with your key in both directions? Please go to step
Can
you open with your key only in the
left direction?
Not in the right direction?
➞ Your Nightlatch needs an additional plate.
P E L A E S G O T O T S P E
Please attach the additional handing plate tightly onto the
cylinder xing surf rf r ace face f .
The plate must be alighed with the shape.
Make sure the 'LEFT TURN' is shown as the image below
if your latch is opened only to the LEFT direction by the key.
Self adhesive pad
Screws
•
Batteries
•
• Self adhesive
pad
Y3 Chrome
Nightlatch
Box(Option)
ISL-1290-01
?
BELO , and BELOW BELOW
Ⓒ 90° deg Ⓓ 90° deg in
in either either
direction direction direction direction
Ⓑ KEY
Can
you open with your key only in the
right direction?
Not in the left direction?
➞ Your Nightlatch needs an additional plate.
P E L A E S G O T O T S P E
Please attach the additional handing plate tightly onto the
cylinder xing surf rf r ac fac f e.
The plate must be ali e ali e ghed with the s he s he hape.
Make sure the 'RIGHT TURN' is shown as the image be e low e be
if your latch is r r latch is opened only to t to he RIGHT direction by the key. to t
Self adhesive pad
smart
Living
Keyless Connected Smart
Lock Installation Guide
Please read the intructions before fitting and using the
Keyless Connected lock.
The functions and design of this product can be changed
without prior notice for performance and quality improvements.
The smarter way to protect your home
Disassemble Lockset
Door Preparation
Use template
provided
72.5mm
60mm
Keyless Connected
Installation Guide
•
Please disassemble your existing Nightlatch case and
mounting plate.
* The nightlatch & plates above are generic images.
If you are retro tting Yale digital lock,
your product may be di erent.
20mm Hole
32mm Hole