soundsation Go-Sound 8AMW User Manual page 10

ENGLISH
GO-SOUND 8-10 AMW User manual
signals. There is no phantom power so, in case of microphones, please be advised the
you can use all kind of dynamic microphones, or use condenser microphones with their
own battery power.
11) Digital MEDIA player
This panel controls all functions related to the multi-player and hosts the Bluetooth™
receiver as well as USB and SD-Card slots. For further information about how to use it,
see "4.2. Digital Media Player Control Panel" on page 11.
12) 2-Band EQ
This EQ optimizes the overall frequency response in order to better adapt the speaker
to the environment in which it is used. It operates on 2-bands (20-100 Hz, 9K-20KHz)
with a gain/reduction of +/- 15dB.
13) Master LEVEL
This controls the overall level of the speaker.
14) STEREO IN / MP3 Selection
This switch toggles between the stereo mini-jack connector (16) and the multimedia
player (11), whose level is adjusted by knob n. 6.
15) Line Out
It is a pair of RCA outlets with unbalanced line-level signals. It contains the mix of all
inputs and all controls. It can be used for recording purposes or simply to connect the
GO-SOUND AMW PA system to a mixer o any other audio system.
NOTE: This output is not affected by MASTER LEVEL and 2-Band EQ.
16) Stereo Input
This stereo mini-jack plug can be used to connect mobile phones, tablets, computers,
etc. Please use knob number 6 to adjust its level.
10