Basic Photometric Functions - Macherey-Nagel PF-12 Plus Manual

5.5 Basic photometric functions

Method 901: Measurement with factor
Select the desired wavelength using
and confirm with
Return to the method selection by pressing
Method 902: Measurement with standard
Select the desired wavelength using
tration via keypad and confirm with
tions on the display. Return to the method selection by pressing
tration will be erased.
Method 903: Measurement of extinction
Select the desired wavelength using
perform the measurement
by following the instructions on the display. Return to the method selection by pressing
Method 905: Measurement of transmission
Select the desired wavelength using
perform the measurement
by following the instructions on the display. Return to the method selection by pressing
Method 906: Measurement of nephelometric turbidity
Perform the measurement by following the instructions on the display. Return to the method
selection by pressing
The turbidity calibration can be performed via this menu and is started by pressing
One after the other the turbidity solutions from the test kit NANOCONTROL NANOTURB
(REF 925 702) are put into the photometer and measurement is started with
calibration is finish it can be confirmed with
By calling up method 901–903 and 905–906 you can access
basic photometric functions or select the required option in the
scroll mode by using
. Perform the measurement by following the instructions on the display.
.
04.07.2014
/ .
/ and confirm with
. The factor will be erased.
/ and confirm with
. Perform the measurement by following the instruc-
/ and confirm with
/ and confirm with
.
, enter the factor via keypad
, enter the standard concen-
. The standard concen-
,
.
,
.
.
. After the
41