S5-3-4 Cpu Initialize And Start - FujiFilm NA0LA-ET1 User Manual

Software Section

S5-3-4 CPU initialize and start

This command is used to initialize and start a CPU that is currently stopped. The retain memory is cleared before the CPU is
started. An error occurs if the CPU is already started.
1) Command/mode code
Command: 04h, Mode: 05h
2) Format of the data part of request command and response command
None
3) Example of initialize and start command
The table below shows the command part for executing the "CPU initialize and start" command.
Operation status
Connection mode
Connection ID (L)
Connection ID (H)
Fixed to 11h
Fixed to 00h
Fixed to 00h
Fixed to 00h
Fixed to 00h
Fixed to 00h
Command
Mode
Fixed to 00h
Fixed to 01h
No. of bytes of data part (L)
No. of bytes of data part (H)
Request command Response command
FF
7B
FE
00
11
00
00
00
00
00
04
05
00
01
00
00
00
7B
FE
00
11
00
00
00
00
00
04
05
00
01
00
00
S-34