Software Section
Section S7 Failure Diagnosis
You can perform failure diagnosis of the unit by using the failure diagnosis function of the loader. On the "Failure diagnosis"
dialog box, select the unit to display the various kinds of information on the unit. This section describes the information related
to the unit. Each of the front board and left side expansion unit has information. In this section, information on the front board is
described as an example.
S7-1 System RAS
Click the [System RAS] tab to display the information shown below.
(1) Type information
The module name, type, etc are indicated.
(2) Module intensive status information
The summary of the unit's status is indicated
S-43