FujiFilm NA0LA-ET1 User Manual page 53

Software Section
(2) Left side expansion unit special register area
Address
D300win Standard
%MW3.62432 WL62432
| |
%MW3.62435 WL62435
%MW3.62436 WL62436
%MW3.62437 WL62437
%MW3.62438 WL62438
%MW3.62439 WL62439
%MW3.62440 WL62440
%MW3.62441 WL62441
%MW3.62442 WL62442
%MW3.62443 WL62443
%MW3.62444 WL62444
%MW3.62445 WL62445
%MW3.62446 WL62446
%MW3.62447 WL62447
%MW3.62448 WL62448
%MW3.62449 WL62449
%MW3.62450 WL62450
%MW3.62451 WL62451
%MW3.62452 WL62452
%MW3.62453 WL62453
%MW3.62454 WL62454
%MW3.62455 WL62455
| |
%MW3.62463 WL62463
Name
Not used
IP address (L)
IP address (H)
Subnet mask (L)
Subnet mask (H)
Default gateway address (L)
Default gateway address (H)
TCP sending and receiving
timeout value
Not used
Loader command watch timer
value
Not used
Sending retry number of times
Close process during TCP
sending timeout
Close process during response
receiving timeout
Not used
Not used
Response watch timer value
Loader command receive port
Loader commend send port
Parameter setting request flag
Not used
Description
Indicates the IP address of the self station.
Indicates the subnet mask
Indicates the IP address of the default gateway
Indicates the TCP sending timeout value.
Indicates timer to monitor access from the target station in
the loader command (server operation) mode.
Indicates the number of sending retries in TCP
communication. (Fixed to 8)
Not supported
Not supported
Not supported
Indicates the port No. of the self station in the loader
communication (server operation) mode.
In the loader communication (client operation) mode,
the port No. of the self station = "Loader command receive
port" + "Internal socket No." + 1.
Indicates the port No. of the target station in the loader
communication (client operation) mode.
Used to write the contents of the special register.
S-38