FujiFilm NA0LA-ET1 User Manual page 62

Software Section
(2) Initializing information
Information on the unit (such as MAC address and communication parameter settings) is stored in this area.
The contents of this area are the same as those of the communication parameter special register non-retain area (for reading).
For details, see "S6-2 Communication Parameter Special Register Non-retain Area (for Reading)."
<Initialization information address map>
Address Name
0000h MAC address (L)
0001h MAC address (M)
0002h MAC address (H)
0003h Reserved
0004h IP address (L)
0005h IP address (H)
0006h Subnet mask (L)
0007h Subnet mask (H)
0008h Default gateway address (L)
0009h Default gateway address (H)
000Ah TCP sending and receiving timeout value
000Bh Reserved
000Ch Loader command watch timer value
000Dh Reserved
000Eh Sending retry number of times
000Fh Close process during TCP sending timeout
0010h Close process during response receiving timeout
0011h Reserved
0012h Reserved
0013h Response watch timer value
0014h Loader command receive port
0015h Loader commend send port
0016h Communication parameter status
0017h Reserved
S-47