Ducati Hyperstrada Owner's Manual page 53

Once the desired riding mode is highlighted, keep
button (4) pressed for 3 seconds and instrument
panel will check throttle control position and front and
rear brake pressure:
- if throttle control is "closed" and brakes are
released or vehicle is stopped, the instrument
panel will confirm the selected riding mode (*)
and go back to the standard screen view ;
- if throttle control is "open" or brakes are pressed
and vehicle is moving, instrument panel will
enable the "CLOSE THROTTLE AND RELEASE
BRAKES" indicator on the display and, only when
all the required conditions are fulfilled (closed
throttle and released brakes or vehicle stopped)
the instrument panel will confirm the selected
riding mode (*) and go back to the standard
screen view.
Note
(*) If the change of Riding mode is associated
with the ABS change of state from ON to OFF or vice-
versa, the instrument panel also starts the "procedure
for disabling or activating the ABS", respectively,
upon confirmation of the selected riding mode.
52
If throttle control is not closed and brakes are not
released or vehicle is not stopped within 5 seconds
after the "CLOSE THROTTLE AND RELEASE
BRAKES" warning is displayed, the Riding Mode
change selection procedure will not be executed and
the instrument panel will go back to the standard
screen view without any setup change.
Fig. 31