Main maintenance operations
Check and top up the coolant level
Check the coolant level in the expansion reservoir on
the right-hand side of the headstock. Steer the
handlebar completely to the left and check that the
level is between the MIN and MAX marks on the side
of the expansion reservoir. Top up if the level is below
the MIN mark. Unscrew the filler plug (1) and add ENI
Agip Permanent Spezial antifreeze, which is not to be
diluted, up to MAX level. Refit the filler plug (1). This
type of mixture ensures the best operating conditions
(the coolant starts to freeze at -20 °C/-4 °F).
Cooling circuit capacity: 2.3 cu. dm (litres).
Make sure the engine is cold before proceeding.
Attempting to change the coolant with the engine hot
could lead to burns from hot coolant or scalding