Related Manuals for Seagate Skyhawk AI ST6000VE001
Summary of Contents for Seagate Skyhawk AI ST6000VE001
- Page 1 SATA Product Manual Standard models ST6000VE001 ST4000VE001 100832218, Rev. B April 2018...
- Page 2 Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. PowerChoice, SeaTools and SkyHawk are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or regis- tered trademarks are the property of their respective owners.
-
Page 3: Table Of Contents
Warranty ................18 2.9.4 Seagate® Rescue™ Data Recovery Service Program Terms (for +Rescue models) ..18 2.10 Agency and Safety Certifications . - Page 4 S.M.A.R.T. commands............. . 35 Seagate SkyHawk AI Product Manual, Rev. B...
- Page 5 Mounting dimensions ............... . . 27 Seagate SkyHawk AI Product Manual, Rev. B...
-
Page 6: Seagate® Technology Support Services
For information regarding online support and services, visit: http://www.seagate.com/contacts/ For information regarding Warranty Support, visit: http://www.seagate.com/support/warranty-and-replacements/ For information regarding data recovery services, visit: http://www.seagate.com/services-software/recover/ For Seagate OEM, Distribution partner and reseller portals, visit: http://www.seagate.com/partners/ Seagate SkyHawk AI Product Manual, Rev. B... -
Page 7: Introduction
Introduction This manual describes the functional, mechanical and interface specifications for the following: Seagate® SkyHawk® AI model drives: ST6000VE001 ST4000VE001 These drives provide the following key features: • 2M hour MTBF - designed for high write duty cycle across SkyHawk AI •... -
Page 8: Drive Specifications
26°C max (operating) Wet bulb temperature (max) 29°C max (nonoperating) –304m to 3048m Altitude, operating (–1000 ft to 10,000 ft) Altitude, non-operating –304m to12,192m (below mean sea level, max) (–1000ft to 40,000+ ft) Seagate SkyHawk AI Product Manual, Rev. B... - Page 9 ** During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. † Seagate does not recommend operating at sustained case temperatures above 60°C. Operating at higher temperatures will reduce useful life of the product. Seagate SkyHawk AI Product Manual, Rev. B...
-
Page 10: Formatted Capacity
25/30 Standby to ready (sec) (typ/max) 25/30 Ready to spindle stop (sec) (typ/max) 10/11 Time-to-ready may be longer than normal if the drive power is removed without going through normal OS powerdown procedures. Seagate SkyHawk AI Product Manual, Rev. B... -
Page 11: Power Specifications
0.606 0.498 9.01 Maximum DC 0.611 0.500 9.06 * During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. Seagate SkyHawk AI Product Manual, Rev. B... -
Page 12: Conducted Noise
• Using 5-volt power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave injected noise at up to 10MHz. Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write current. Note 2.5.3 Voltage tolerance Voltage tolerance (including noise): 5V +10/ -5% 12V ± 10% Seagate SkyHawk AI Product Manual, Rev. B... -
Page 13: Extended Power Conditions - Powerchoicetm
• Default enabled state, and timer value • Saved enabled state, and timer value • Current enabled state, and timer value S.M.A.R.T. Read Data Reports • Attribute 192 - Emergency Retract Count • Attribute 193 - Load/Unload Cycle Count Seagate SkyHawk AI Product Manual, Rev. B... - Page 14 Enable EPC Feature Set Disable EPC Feature Set PowerChoice Supported Extended Power Condition Identifiers Power Condition Identifiers Power Condition Name Standby_z 01 - 80 Reserved Idle_a Idle_b Idle_c 84 - FE Reserved All EPC Power Conditions Seagate SkyHawk AI Product Manual, Rev. B...
-
Page 15: Environmental Limits
Non-operating –40° to 158°F (–40° to 70°C) package ambient with a maximum gradient of 36°F (20°C) per hour. This specification assumes that the drive is packaged in the shipping container designed by Seagate for use with drive. HDA Temp. -
Page 16: Shock
The maximum nonoperating vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below. 2–500 Hz 2.27 Grms ref Linear Random Freq (Hz) .001 .001 Seagate SkyHawk AI Product Manual, Rev. B... -
Page 17: Acoustics
Test for Prominent Discrete Tones (PDTs) Seagate follows the ECMA-74 standards for measurement and identification of PDTs. An exception to this process is the use of the absolute threshold of hearing. Seagate uses this threshold curve (originated in ISO 389-7) to discern tone audibility and to compensate for the inaudible components of sound prior to computation of tone ratios according to Annex D of the ECMA-74 standards. -
Page 18: Reliability
Storage Maximum storage periods are 180 days within original unopened Seagate shipping package or 60 days unpackaged within the defined non-operating limits (refer to environmental section in this manual). Storage can be extended to 1 year packaged or unpackaged under optimal environmental conditions (25°C, <40% relative humidity non-condensing, and non-corrosive environment). -
Page 19: Warranty
To enable Rescue Data Recovery warranty coverage register at Seagate.com/register. If you suffer a data loss event within the first 2 years of your 5 year warranty and you are eligible to participate in and submit a case under the Seagate Rescue Data Recovery program, contact SRS at 800-475-0143... - Page 20 Seagate reserves the right to refuse service to or the return of any storage devices that have been determined to violate these regulations.
-
Page 21: Agency And Safety Certifications
Program Terms to do so. Also, the Program and these Program Terms are in addition and unrelated to any rights you may have under a Seagate warranty statement. -
Page 22: Australian Rcm Compliance Mark
2.10.6 Morocco Commodity Mark To satisfy our OEM customers, Seagate has added the Moroccan Commodity Mark to the drives provided to the OEM for the sale of Customer Kits produced by our OEM customers that are intended to be incorporated into the OEM's finished system-level product by an end user. -
Page 23: Environmental Protection
The European Union REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) Regulation (EC) 1907/ 2006 regulates chemicals shipped into and used in Europe. A number of parts and materials in Seagate products are procured from external suppliers. We rely on the representations of our suppliers regarding the presence of REACH substances in these articles and materials. -
Page 24: China Requirements -China Rohs 2
2016, titled Management Methods for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products. To comply with China RoHS 2, Seagate determines this product's Environmental Protection Use Period (EPUP) to be 20 years in accordance with the Marking for the Restricted Use of Hazardous Substances in Electronic and Electrical Products, SJT 11364-2014. -
Page 25: Taiwan Requirements - Taiwan Rohs
Taiwan RoHS refers to the Taiwan Bureau of Standards, Metrology and Inspection’s (BSMI) requirements in standard CNS 15663, Guidance to reduction of the restricted chemical substances in electrical and electronic equipment. Seagate products must comply with the “Marking of presence” requirements in Section 5 of CNS 15663, effective January 1, 2018. -
Page 26: Corrosive Environment
Seagate recommends that data centers be kept clean by monitoring and controlling the dust and gaseous contamination. Gaseous contamination should be within ANSI/ISA S71.04-2013 G2 classification levels (as measured on copper and silver coupons), and dust contamination to ISO 14644-1 Class 8 standards, and MTBF rated conditions as defined in the Annualized Failure Rate (AFR) and Mean Time Between Failure (MTBF) section. -
Page 27: Configuring And Mounting The Drive
For installations which require cables, users can connect the drive as illustrated in Figure 3. Power cable Figure 3 Attaching SATA cabling Each cable is keyed to ensure correct orientation. SkyHawk AI drives support latching SATA connectors. Seagate SkyHawk AI Product Manual, Rev. B... -
Page 28: Drive Mounting
101.60 ±.25 mm .14 MAX FASTENER PENETRATION MOUNTING HOLES BOTH SIDES. MAX TORQUE 6 IN/LBS C L OF DRIVE .138±.015 2 2.000 in 50.80 mm TEMPERATURE 1.028 MAX CHECKPOINT 60°C MAX 26.11 MM Seagate SkyHawk AI Product Manual, Rev. B... -
Page 29: Sata Interface
There are three power pins for each voltage. One pin from each voltage is used for pre-charge when installed in a blind-mate back- plane configuration. • All used voltage pins (V ) must be terminated. Seagate SkyHawk AI Product Manual, Rev. B... -
Page 30: Supported Ata Commands
Read Sectors Extended Read Sectors Without Retries Read Verify Sectors Read Verify Sectors Extended Read Verify Sectors Without Retries Recalibrate Security Disable Password Security Erase Prepare Security Erase Unit Security Freeze Security Set Password Seagate SkyHawk AI Product Manual, Rev. B... - Page 31 Write DMA Extended Write DMA FUA Extended Write DMA Without Retries Write Log Extended Write Multiple Write Multiple Extended Write Multiple FUA Extended Write Sectors Write Sectors Without Retries Write Sectors Extended Write Uncorrectable Seagate SkyHawk AI Product Manual, Rev. B...
-
Page 32: Identify Device Command
Advanced PIO modes supported (modes 3 and 4 supported) 0003 Minimum multiword DMA transfer cycle time per word (120 nsec) 0078 Recommended multiword DMA transfer cycle time per word (120 nsec) 0078 Seagate SkyHawk AI Product Manual, Rev. B... - Page 33 Integrity word xxA5 Advanced Power Management (APM) and Automatic Acoustic Management (AAM) features are not supported. Note See the bit descriptions below for words 63, 84, and 88 of the Identify Drive data. Note Seagate SkyHawk AI Product Manual, Rev. B...
- Page 34 Ultra DMA mode 2 is currently active. Ultra DMA mode 3 is currently active. Ultra DMA mode 4 is currently active. Ultra DMA mode 5 is currently active. Ultra DMA mode 6 is currently active. Seagate SkyHawk AI Product Manual, Rev. B...
-
Page 35: Set Features Command
Disable use of SATA features Enable read look-ahead (read cache) feature (default) Report full capacity available At power-on, or after a hardware or software reset, the default values of the features are as indicated above. Note Seagate SkyHawk AI Product Manual, Rev. B... -
Page 36: Commands
) that eliminates unnecessary drive returns. The diagnostic software ships with all new drives and is also available at: http://seatools.seagate.com. This drive is shipped with S.M.A.R.T. features disabled. Users must have a recent BIOS or software package that supports S.M.A.R.T. to enable this feature. - Page 37 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888 EUROPE, MIDDLE EAST AND AFRICA Seagate Technology SAS 16-18 rue du Dôme, 92100 Boulogne-Billancourt, France, 33 1-4186 10 00 Publication Number: 100832218, Rev. B...
Need help?
Do you have a question about the Skyhawk AI ST6000VE001 and is the answer not in the manual?
Questions and answers