Wire The Kpr2000; Features - Chamberlain KPR2000 Installation Setup Manual

INTRODUCTION

WIRE THE KPR2000

Wire Insulation
Color
BASIC STAND ALONE WIRING (WITH A GATE OPERATOR)
Red
Black
Blue
Purple
Orange
CONNECTING TWO KPR2000 UNITS
Red
Black
Green
White
Pink
ADVANCED INPUT AND OUTPUT FEATURES
Yellow
Gray
Brown
Pink
ACCESS CONTROL SYSTEM
Red
Black
Pink
Green
White
INSTALLATION
Wiring Notes
Function
Power 12 - 24 Volts DC or 12 - 18 Volts AC regulated power input
Power 12 - 24 Volts DC or 12 - 18 Volts AC regulated power input
Relay NO Normally Open Relay Output (Install diode) provided)
Relay Common Connection for Relay Output
Common
Relay NC Normally Closed Relay Output (Install diode[provided])
Power 12 - 24 Volts DC or 12 - 18 Volts AC regulated power input
Power 12 - 24 Volts DC or 12 - 18 Volts AC regulated power input
Data 0 Wiegand Output (Pass-through)/Input (Stand Alone) Data 0
Data 1 Wiegand Output (Pass-through)/Input (Stand Alone) Data 1
Ground Ground reference for Wiegand Output/Input
REX Request To Exit (REX) Input
Alarm Output Negative contact for Alarm
Contact Input Door/Gate Contact Input (Normally Closed)
Ground Ground reference for REX, and Door/Gate contact inputs.
Power 12 - 24 Volts DC or 12 - 18 Volts AC regulated power input
Power 12 - 24 Volts DC or 12 - 18 Volts AC regulated power input
Ground Ground reference for Wiegand Output/Input
Data 0 Wiegand Output (Pass-through)/Input (Stand Alone) Data 0
Data 1 Wiegand Output (Pass-through)/Input (Stand Alone) Data 1
WIRING
7
SET UP