INTRODUCTION
ALARM
TO RESET THE ALARM
Programming Step
To reset the door forced open
warning
To reset the door open too long
(DOTL) warning
ANTI-TAMPER ALARM
The KPR2000 uses an optical sensor as the input for its internal alarm. If the case is
opened while the KPR2000 is powered, the alarm will operate. Enter Master Code or
a valid card to silence all alarm outputs.
INSTALLATION
Keystroke Combination
(Read valid card)
OR
(Master Code) #
(Read valid card)
OR
(Master Code) #
20
WIRING
SET UP