INTRODUCTION
PROGRAM CARDS AND PINS
Programming will vary depending on the access configuration.
Follow the instructions according to your access configuration.
GENERAL PROGRAMMING INFORMATION
•
User ID Number: Assign a user ID number to the access code in order to keep
track of the users of access cards or PINs. The user ID number can be any
number from 1-2000. IMPORTANT: User IDs do not have to be proceeded with
any leading zeros. Recording of User ID is critical. Modifications to user data
require either the card or the User ID be available.
•
Proximity Card: Any 125 KHz industry standard 26 bit Wiegand Proximity Card,
or 30 bit Sentex Proximity Card.
•
Keypad PIN: The PIN can be any 4 - 5 digits between 0000 - 65535 (except 1234
which is reserved for factory testing). IMPORTANT: PINs less than 1000 must be
preceded with leading zeros. PINs greater than 999 do not require any leading
zeros.
EXAMPLES:
PIN code 15 = 0015
PIN code 25 = 0025
PIN code 9999 = 9999
PIN code 65431 = 65431
•
All card users are automatically assigned a default PIN of 1234 that must be
changed to be activated.
INSTALLATION
15
WIRING
SET UP