Get Started; Phone Battery - Kyocera Neo User Manual

1

Get Started

Phone Battery

Install the Battery
To install the battery:
1. Hold the phone face down.
2. Find notch directly above the back cover. It is
square. Use the notch to slide the cover
down. Lift the cover from the bottom to
remove.
3. Place the battery in the battery casing with
the metal contacts facing toward the bottom
of the phone. The metal contacts of the
battery must make contact with the metal
contacts of the battery casing.
User Guide
4. Replace the battery door by sliding the
notches into the openings on each side of the
battery casing.
5. Snap the cover into place.
Charge the Battery
You must have at least a partial charge in the
battery to make or receive calls.
To charge the battery:
1. Connect the AC adapter to the microUSB jack
on the side of the phone.
2. Plug the adapter into a wall outlet.
The battery icon in the upper-right corner of the
screen tells you whether the phone is:
– Charging (the icon is animated)
– Partially charged
– Fully charged
9